The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
This section includes symptoms, possible causes, and solutions for the following problems while you upgrade the Cisco Nexus 1000V.
Symptom |
Possible Causes |
Verification and Solution |
---|---|---|
Cisco Virtual Switch Update Manager displays the following pop up message and does not allow you to proceed with the installation: "SWITCH_HAS_NO_STANDBY" |
The Cisco Nexus 1000V does not have a standby. |
Use the Cisco Nexus 1000V switch with a standby, active, or redundancy role. Check the following log: 428443293 ERROR 2014-08-18 12:34:23,785[http-bio-8443-exec-9] com.cisco.service.intercept.N1KVExceptionMapper - Translating exception= com.cisco.n1kv.exception.SwitchHasNoStandby at com.cisco.n1kv.upgrade. UpgradeHelper.doRecGenerationPreChecks (UpgradeHelper.java:423) Payload: <?xml version="1.0" encoding="UTF-8" standalone="yes"?><errorData><errorCode> SWITCH_HAS_NO_STANDBY< /errorCode> <msgObjects><obj xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/ XMLSchema-instance"> VSM-CCO-SV1-52b</obj><rank>0</rank></msgObjects> <msgTemplate>Switch {0} has no standby.</msgTemplate></errorData> |
In the Switch Upgrade Path area, none of the hosts are available |
The Cisco Nexus 1000V switch includes one or more hosts that are unsupported. |
Prior to upgrading the Cisco Nexus 1000V switch, upgrade the ESXi hosts to the version that is compatible with the version of the Cisco Nexus 1000V that you want to upgrade to. |
During an upgrade of the Cisco Nexus 1000V, the host being upgraded should appear in the Eligible Hosts drop-down list. However, the host might appear in the No Upgrade Needed Hosts drop-down list. |
Browser history and cached memory need to be cleared. |
|
If a problem persists after you try solutions in the preceding table, follow instructions in the section Collecting VSUM Bundle Logs for the Cisco Technical Assistance Center.