The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - C - D - E - F - G - H - I - L - M - N - P - R - S - V -Index
A
access and trunk interface 1
adding description
port channel 1
allowed VLANs 1C
changed information
description 1
clearing
interface counters 1
configuring 1
device to tag native VLAN traffic 1
global vEthernet properties 1
interface description 1
interface speed and duplex modes 1
interface subgroups 1
LACP port channel 1
LAN interface 1
MTU size for an Ethernet interface 1
native VLAN 1
network state tracking 1
port channel load balancing 1
private VLAN on a vEthernet interface 1
speed and duplex settings 1
static pinning 1
trunk ports 1
VEM management of LACP 1
vEthernet access interface 1
connecting
multiple upstream switches 1
single upstream switch 1
creating
port profile 1D
default settings
access and trunk interfaces 1
port channel 1
vEthernet interface 1E
enabling
CDP 1
vEthernet interface 1
example
access and trunk mode port 1
port channels 1
vEthernet interface 1F
feature history
basic interface parameters 1
Layer 2 interface parameter 1
portchannels 1
vEthernet interface 1G
guidelines and limitations
port channels 1
vEthernet interface 1
VLAN trunking 1H
high availability 1 2I
IEEE.802.1Q Encapsulation 1
interface
administrative status 1
Cisco Discovery Protocol 1
configuration limits 1
configuring static pinning 1
description parameter 1
high availability 1
management 1
port channel 1
port channel parameter 1
port MTU size 1
speed and duplex mode 1
VEM management 1
virtual Ethernet 1
Interface
ethernet 1
new and changed information 1
interfaces 1
access trunk 1L
LACP parameters 1
load balancing method
restoring 1M
MAC pinning 1
Mac pinning relative 1
migrating
channel group 1
port profile types 1
monitoring
interface configuration 1
port channels 1
vEthernet interface configuration 1N
network state tracking
configuring 1
Network State Tracking for VPC-HM 1
new information
description 1P
pinning
control or packet VLAN to a subgroup 1
vEthernet interface 1
port channel
adding description 1
configuring LACP 1
configuring load balancing 1
configuring speed and duplex settings 1
shutting down 1
port channel group
removing 1
port channel modes 1
port channels 1 2
compatibility checks 1
LACP 1
load balancing 1
prerequisites
port channels 1
VLAN trunking 1R
removing
port channel group 1
restoring
default load balancing method 1S
shutting down
interface 1
port channel 1
specifying
interface 1
static pinning 1
supported RFCs 1V
VEM Management of LACP 1
verifying
interface parameters 1
verifying the configuration
interface 1
port channel 1
vEthernet interface 1
vEthernet interfaces 1
vPC Host Mode 1