Cisco Nexus 1010 Software Installation and Upgrade Guide, Release 4.2(1)SP1(4a)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- December 7, 2013
Chapter: Index
Index
A
appliance name
CLI setup 2-13
audience iii-v
C
CIMC
information about 1-1
CLI prompt, appliance 2-13
control and packet VLAN
about 2-8
conventions iii-vi
D
default gateway
CLI setup 2-13
documentation
additional publications iii-vii
related documents iii-vi
F
Flow Chart
Replacing a Cisco Nexus 1010 2-24
H
HA
redundancy role 2-6
redundancy state 2-7
M
management software
verify setup 2-18
management VLAN
about 2-8
mgmt0
CLI setup 2-13
N
name, appliance 2-13
NTP
CLI setup 2-13
P
password strength 2-6
ports, uplinks 2-8
prompt, CLI 2-13
R
redundancy
role 2-6
state 2-7
related documents iii-vii, iii-viii
replacing a Cisco Nexus 1010 2-21
S
SSH
CLI setup 2-13
strong password 2-6
T
Telnet
CLI setup 2-13
U
uplinks
CLI setup 2-16
port and VLAN assignments 2-8
V
verify
management software setup 2-18
VLAN
about 2-8
uplink port assignments 2-8
Feedback