The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Access Control List 2-27
ACL 2-27
allowing vlans 2-24
asymmetric port channel 1-5
capability command 2-9
channel-group command 2-19, 2-21
characteristics of port profile, list 1-2
clearing a policy 2-14, 2-16
community ports 2-26
default command 2-15
description command 2-8, 2-16
disabled state, about 1-2
additional publications 1-ii
port profile 2-34
ports in the profile 2-14
enabled state, about 1-2
except vlan IDs 2-24
extended vlan range 2-22
updating an existing port profile 2-4
host ports 2-26
internally-allocated vlans 2-22
ip flow monitor command 2-29
isolated ports 2-26
mac port access-group command 2-28
mapping pvlan 2-26
netflow 2-28
no port-profile command 2-36
normal vlan range 2-22
no shutdown command 2-14
number, channel group 2-19, 2-21
number range, vlan 2-22
options, designating group as VMware 2-11
pg-name option 2-12
port channel, host mode 1-5
port management 2-13
ACL 2-27
creating, 2-8
enabling 2-33
mapping pvlan 2-26
netflow 2-28
port channels 2-18
port management 2-13
private vlan 2-25
remove 2-35
updating, flow chart 2-4
viewing 2-30
vlan 2-22
VMware tag 2-11
port-profile command 2-8, 2-10, 2-29, 2-34
ports, private vlan 2-26
private VLAN 2-25
promiscuous ports 2-26
PVLAN 2-25
PVLAN-switchport association 2-26
ranges, vlan 2-22
related documents 1-ii
remove vlan IDs 2-24
removing a port profile 2-35
show port-profile command 2-30
shutdown command 2-15
port profile, about 1-2
state enabled command 2-34
switchport access vlan, command 2-24
switchport mode command 2-14, 2-15
switchport mode private-vlan command 2-26
switchport private-vlan host-association command 2-26
switchport private-vlan mapping command 2-26
switchport-PVLAN association 2-26
switchport trunk allowed vlan, command 2-23, 2-24
system vlan command 2-17
updating port profiles 2-4
uplink capability 2-9
VLAN, private 2-25
vlan ID allowed 2-24
vlan ranges 2-22
VMware, identifying in port group 2-11
vmware port-group command 2-12
about 1-5
configuring 2-20
Index
Access Control List 2-27
ACL 2-27
allowing vlans 2-24
asymmetric port channel 1-5
capability command 2-9
channel-group command 2-19, 2-21
characteristics of port profile, list 1-2
clearing a policy 2-14, 2-16
community ports 2-26
default command 2-15
description command 2-8, 2-16
disabled state, about 1-2
additional publications 1-ii
port profile 2-34
ports in the profile 2-14
enabled state, about 1-2
except vlan IDs 2-24
extended vlan range 2-22
updating an existing port profile 2-4
host ports 2-26
internally-allocated vlans 2-22
ip flow monitor command 2-29
isolated ports 2-26
mac port access-group command 2-28
mapping pvlan 2-26
netflow 2-28
no port-profile command 2-36
normal vlan range 2-22
no shutdown command 2-14
number, channel group 2-19, 2-21
number range, vlan 2-22
options, designating group as VMware 2-11
pg-name option 2-12
port channel, host mode 1-5
port management 2-13
ACL 2-27
creating, 2-8
enabling 2-33
mapping pvlan 2-26
netflow 2-28
port channels 2-18
port management 2-13
private vlan 2-25
remove 2-35
updating, flow chart 2-4
viewing 2-30
vlan 2-22
VMware tag 2-11
port-profile command 2-8, 2-10, 2-29, 2-34
ports, private vlan 2-26
private VLAN 2-25
promiscuous ports 2-26
PVLAN 2-25
PVLAN-switchport association 2-26
ranges, vlan 2-22
related documents 1-ii
remove vlan IDs 2-24
removing a port profile 2-35
show port-profile command 2-30
shutdown command 2-15
port profile, about 1-2
state enabled command 2-34
switchport access vlan, command 2-24
switchport mode command 2-14, 2-15
switchport mode private-vlan command 2-26
switchport private-vlan host-association command 2-26
switchport private-vlan mapping command 2-26
switchport-PVLAN association 2-26
switchport trunk allowed vlan, command 2-23, 2-24
system vlan command 2-17
updating port profiles 2-4
uplink capability 2-9
VLAN, private 2-25
vlan ID allowed 2-24
vlan ranges 2-22
VMware, identifying in port group 2-11
vmware port-group command 2-12
about 1-5
configuring 2-20