The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document provides release-specific information for each new and changed feature in Cisco Data Mobility Manager.
Table summarizes the new and changed features as described in the Cisco MDS 9000 Series Data Mobility Manager Configuration Guide , and tells you where they are documented. The table includes a brief description of each new feature and the release in which the change occurred.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
DMM |
Updated the Limitations and Restrictions section for the bulk notification feature. |
6.2(7) |
|
Cisco MDS 9250i Multiservice Fabric Switch |
Added the support for Cisco MDS 9250i Multiservice Fabric Switch. |
6.2(5) |
|
Method 3 |
Deprecated Method 3 |
6.2(3) |
— |
Greater than 2 Terabyte LUN support (Method 1 Only) |
Added capability to migrate LUNs greater than 2TB (Method 1 Jobs only). |
6.2(3) |
|
FC-Redirect on Cisco MDS 9710 |
Added support for hosts and storages connected to MDS 9710. |
6.2(3) |
|
There are no changes since 5.0(1a). |
— |
— |
— |
DMM Pre-Configuration Wizard |
Steps and screenshots added to configure the MDS modules using the DMM Pre-Configuration Wizard. |
5.0(1a) |
|
CPP and default-gateway |
Note added about configuring CPP interface default-gateway on Fabric Manager. |
4.2(1) |