Cisco MDS 9700 Series Accessory Kit Contents
This appendix lists and illustrates the Cisco MDS 9700 Series accessory kit contents (part number 53-4093-XX). (See Table 9-1 .)
Table 9-1 Cisco MDS 9700 Switch Accessory Kit Contents
|
|
|
|
69-2503-XX |
|
Support rack-mount bracket kit (includes the following parts) |
1 kit |
12-24 x 3/4-in. Phillips screws |
20 per kit |
M6 x19-mm Phillips screws |
20 per kit |
10-32 x 3/4-inch screws |
20 per kit |
Support rack-mount bracket |
2 per kit |
|
|
800-05097-XX |
|
Console cable connector kit (includes the following parts) |
2 kits |
RJ-45 rollover cable |
1 per kit |
DB-9F/RJ-45F PC terminal |
1 per kit |
RJ-45/DSUB F/F adapter |
1 per kit |
R-J45/DSUB R/P adapter |
1 per kit |
DSUB screw lock kit |
1 per kit |
69-1815-XX |
|
Ground lug kit (includes the following parts) |
1 kit |
Two-hole lug |
1 per kit |
M4 x 8-mm Phillips pan-head screws |
2 per kit |
79-0087-XX |
|
ESD wrist strap |
1 per kit |
700-29059-01 |
|
SFP Extractor |
1 per kit |
78-21186-XX |
Not applicable |
Product Documentation Pointer Card |
1 per kit |
78-17985-XX |
Not applicable |
China Management Methods Hazardous Substances Content Table |
1 per kit |
Note
If you do not receive any part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
If you purchased this product through a Cisco reseller, you may receive additional contents in your kit, such as documentation, hardware, and power cables.
Each new switch ships with country-specific power cords—the shipped cords depend on your specification when placing a Cisco MDS switch order. The available power cords for the Cisco MDS 9710 Director are as follows:
- CAB-9K16A-AUS—power cord, 250-VAC 16-A, Src Plug A, Australia
- CAB-9K16A-CH—power cord 250-VAC 16-A, Src Plug GB16C, China
- CAB-9K16A-EU—power cord 250-VAC 16-A, Src Plug CEE, Europe
- CAB-9K16A-INT—power cord 250-VAC 16-A, Src Pl, International
- CAB-9K16A-ISR—power cord 250-VAC 16-A, Src Plug SI16, Israel
- CAB-9K16A-SA—power cord 250-VAC 16-A, Src Plug EL, South Africa
- CAB-9K16A-SW—power cord 250-VAC 16-A, Src Plug SEV 5, Switzerland
- CAB-9K16A-US1—power cord 250-VAC 16-A, Src Plug NE, US and Japan
- CAB-9K16A-US2—power cord 250-VAC 16-A, Src Plug NE, US and Japan
- CAB-9K16A-KOR—power cord 250-VAC 16-A, Korea, Src Plug
- CAB-9K20A-NA—power cord 125VAC 20A NEMA 5-20 Plug, North America/Japan
- CAB-9K16A-ARG—power cord 250VAC 16A, Argentina, Src Plug IR2073-C19
- CAB-9K16A-BRZ—power cord 250VAC 16A, Brazil, Src Plug EL224-C19
- CAB-C19-CBN—cabinet jumper power cord, 250 VAC 16A, C20-C19 Connector
The available power cords for the Cisco MDS 9718 Director are as listed in the Cisco MDS 9718 Multilayer Director Datasheet.