Supported Platforms
This section provides forwarding scale profiles hardware support information for Release 5.1(1).
The following table summarizes platform support for each forwarding scale profile.
|
Scale Profile |
Supported on EX and FX2 Switches |
Supported on FX and GX Switches |
|---|---|---|
|
High Policy |
Yes |
Yes, except on FXP switches. Requires 32GB of RAM. Different scale numbers than EX/FX2. |
|
Dual Stack |
Yes |
Yes |
|
High Dual Stack |
Yes |
Yes Different scale numbers than EX/FX2. |
|
High LPM |
Yes |
Yes |
|
IPv4 Scale |
Yes |
Yes |
|
High IPv4 EP Scale |
No |
Only on N9K-C93180YC-FX and N9K-C93600CD-GX switches with 32GB RAM. |
|
Multicast Heavy |
No |
Only on N9K-C93180YC-FX and N9K-C93600CD-GX switches with 32GB RAM. |
-
Forwarding scale profiles are supported on the following specific switch models switches:
-
Cisco Nexus 9300-EX series switches
-
Cisco Nexus 9300-FX series switches
-
Cisco Nexus 9300-FX2 series switches
-
Cisco Nexus 93600CD-GX switch
-
Cisco Nexus 9364C-GX switch
-
-
The High Policy profile is supported only on the following switches:
-
Cisco Nexus 93180YC-FX with 32 GB of RAM
-
Cisco Nexus 93600CD-GX with 32 GB of RAM
-
Cisco Nexus 9364C-GX with 32 GB of RAM
-
Cisco Nexus 93180YC-EX
-
Cisco Nexus C9336C-FX2
-
Cisco Nexus C93360YC-FX2
-
-
The High IPv4 EP profile is supported only on the following switches:
-
Cisco Nexus 93180YC-FX with 32 GB of RAM
-
Cisco Nexus 93600CD-GX with 32 GB of RAM
-
-
The Multicast Heavy profile is supported only on the following switches:
-
Cisco Nexus 93180YC-FX with 32 GB of RAM
-
Cisco Nexus 93600CD-GX with 32 GB of RAM
-
-
Switches not listed here do not support forwarding scale profiles in this release.
Feedback