Cisco Cloud Services Platform Release Notes
This document describes the features and limitations for the Cisco Cloud Services Platforms 2100 and 5000, Release 2.4.0.
Information About Cisco Cloud Services Platform
Cisco Cloud Services Platform is a software and hardware platform for data center network functions virtualization. This open kernel virtual machine (KVM) platform, with Red Hat Enterprise Linux (RHEL) 7.5 as the base operating system, is designed to host networking virtual services. Cisco CSP provides REST APIs, a web interface, and a CLI for creating and managing the virtual machine (VM) lifecycle.
Supported Cisco Networking Services
Cisco CSP can host any Cisco or third-party VNF that is supported on KVM hypervisor. Some of the Cisco VNFs available include the following:
-
Cisco Cloud Services Router (CSR) 1000V virtual router
-
Cisco IOS® XRv 9000 Router
-
Cisco Adaptive Security Virtual Appliance (ASAv)
-
Cisco Firepower™ NGFW Virtual
-
Cisco Prime® Virtual Network Analysis Module (vNAM)
-
Cisco Virtual Wide Area Application Services (vWAAS)
-
Cisco Web Security Virtual Appliance (WSAv)
-
Cisco Virtual Security Gateway (VSG) for Cisco Nexus® 1000V Series Switch deployments
-
Cisco Virtual Supervisor Module (VSM) for Cisco Nexus 1000V Series Switch deployments
-
Cisco Data Center Network Manager (DCNM)
New Features and Enhancements
Cisco CSP Release 2.4.0 includes the following features and enhancements along with security and bug fixes:
Feature |
Description |
---|---|
Zero touch provisioning | Supports auto configuration of CSP during installation with a Day-0 configuration file by using NSO PNP server providing near zero touch deployment experience. |
Enabling or disabling password expiration |
Supports disabling of the password expiration. |
Intel XL 710 dual port 40Gbe | Supports Intel XL 710 NIC with dual 40 GbE interfaces. |
RHEL 7.5 upgrade | RHEL is upgraded to version 7.5. |
Confd 6.7 upgrade |
Confd is upgraded to version 6.7.0. |
GUI enhancements |
Supports an enhanced dashboard view. |
Network View screen |
A new network view screen has been added to visualize services and their interfaces. |
Service template enhancements | Service template can be created, edited, and downloaded. Also service template can be used to create services. |
Note |
The Delete Cluster button on toolbar enables deleting cluster configuration along with all members of a cluster. |
Configuration Limits
Component |
Supported Limits |
---|---|
Number of services in a node with hyperthreading disabled |
|
Total number of nodes in a cluster |
10 |
Number of vNICs per service |
24 |
Important Notes and Restrictions
The following topics provide important notes and restrictions for Cisco CSP.
Hyper-Threading Technology Support
Cisco CSP hardware supports Hyper-Threading (HTT). However by default, HTT is disabled and must be kept disabled, as it is not supported. This action avoids VNFs sharing same CPU cores, cache and memory bus that can result in stalls or latency issues, and VNF data plane performance degradation. The enablement or disablement of Hyper-Threading is done by CIMC on CSP 5000 hardware.
Changing IP Address of the Management Interface for NFS Configurations
If NFS is configured on the system, note the following:
-
Changing the management IP address causes an outage of the VNC console and stats collection for 15 to 30 minutes.
-
Reboot of the system can take up to 30 minutes.
As a workaround, you can unconfigure the NFS mount before performing these operations and reconfigure the NFS mount after the operation is complete. You can also reboot the system from the Cisco CSP CIMC connection.
Configuring Passthrough Interfaces
When a service has passthrough as well as non-passthrough vNICs, we recommend that you first define the non-passthrough vNICs and then define the passthrough vNICs.
Running config terminal Command After Initial Setup
The config terminal command fails when you run it after performing the initial setup for a new installation. This happens because the admin user is not assigned to a group at the initial login. To run this command and configure Cisco CSP features, you must log out and then log in to Cisco CSP.
Network Interface Card (NIC) Driver Compatibility
This release includes the following NICs Physical function (PF) drivers. See VNF documentations for more information about compatibility between the Virtual function (VF) driver included in VNF and the NICs PF drivers.
-
Ixgbe PF driver version: 5.3.3
-
I40e PF driver version: 1.6.27-k
Restrictions
Cisco CSP has the following restrictions:
-
Management interfaces cannot be configured as passthrough interfaces.
-
Only local admin users have the functionality to autocopy images in repositories across the Cisco CSP nodes in a cluster. This functionality is not available for the TACACS+ or RADIUS admin users.
-
Only local users can log in to Cisco CSP using CIMC console. Remote TACACS+ users cannot log in to Cisco CSP by using CIMC console.
-
Only the vNIC e1000 model is supported with Cisco VSM and Cisco VSG services.
-
Only ISO image files are supported with Cisco VSM and Cisco VSG services.
Using the Bug Search Tool
Use the Bug Search Tool to search for a specific bug or to search for all bugs in a release.
Procedure
Step 1 |
Go to the Cisco Bug Search Tool. |
||
Step 2 |
In the Log In screen, enter your registered Cisco.com username and password, and then click Log In. The Bug Search page opens.
|
||
Step 3 |
To search for a specific bug, enter the bug ID in the Search For field and press Enter. |
||
Step 4 |
To search for bugs related to a specific release, do the following:
When the search
results are displayed, use the filter tools to find the types of bugs you are
looking for. You can search for bugs by status, severity, modified date, and so
on.
|
Related Documentation for Cisco Cloud Services Platform
This section lists the documents used with the Cisco Cloud Services Platform and available on Cisco.com at the following URL:
General Information
Cisco Cloud Services Platform Release Notes
Install and Upgrade
Cisco Cloud Services Platform Quick Start Guide
Cisco Cloud Services Platform Hardware Installation Guide
Regulatory Compliance and Safety Information for Cisco Cloud Services Plarform
Configuration Guide
Cisco Cloud Services Platform Configuration Guide
Reference Guides
Cisco Cloud Services Platform Command Reference Guide
Cisco Cloud Services Platform REST API Guide
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.