Configure Active Discovery in a preset
Policies that have been created will be used in a preset. Configuring Active Discovery in a preset consists in selecting a policy and configuring a schedule for Unicast and/or Broadcast scans. In the example, a preset Broadcast Enip is used.
To configure Active Discovery on a preset:
Before you begin
A preset can be used for Active Discovery if at least one sensor is selected in the filter preset criteria. The selected sensors will be used to execute the policy selected in the preset. Those sensors need to have access to the different networks to scan. For Unicast Active Discovery, the preset device list will be used to list the IP addresses to scan. In other words, the Active Discovery engine will use the IPv4 inside a component list to build its own list of components to scan.
Procedure
Step 1 |
Open the preset in the Explorer menu. The presets' settings are displayed on the left:
|
Step 2 |
Click the Edit Active Discovery settings icon. |
Step 3 |
Toggle the Use Active Discovery button ON. |
Step 4 |
Select a Policy. |
Step 5 |
To run Active Discovery, you have two options: |
Step 6 |
You can modify these settings as you like. |