clear controller pse statistics
To clear statistics maintained by the packet switching engine (PSE) on a specific node, use the clear controller pse statistics command in XR EXEC mode.
clear controller pse statistics summary instance instance-number location node-id
Syntax Description
location node-id |
Identifies the location of the node whose PSE device statistics you want to clear. The node-id argument is expressed in the rack/slot/module notation.
|
||
instance instance-number |
Replace the instance-number argument with a device instance number. The range is from 0 to 16. |
Command Default
No default behavior or values.
Command Modes
XR EXEC mode
Command History
Release |
Modification |
---|---|
Release 5.0.0 |
This command was introduced. |
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID |
Operations |
---|---|
interface |
read, write |
drivers |
read |
Examples
The following example shows how to clear all PSE statistics on a specific node (0/5/CPU0):
RP/0/RP0/CPU0:router# clear controller pse statistics summary instance 0 location 0/5/CPU0