Guest

Cisco ASR 9000 Series Aggregation Services Router System Management Command Reference, Release 4.3.x

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco ASR 9000 Series Aggregation Services Router System Management Command Reference, Release 4.3.x

Chapter Title

Secure Domain Router Commands

Results

Updated:
September 15, 2016

Chapter: Secure Domain Router Commands

Secure Domain Router Commands

Secure domain routers (SDRs) are a means of dividing a single physical system into multiple logically separated routers. Cisco ASR 9000 Series Routers are single-shelf routers that only support one SDR—the Owner SDR.

For detailed information about secure domain router concepts, configuration tasks, and examples, see the Configuring Secure Domain Routers on Cisco IOS XR Software module in Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide.

show sdr

To display information about the currently defined secure domain routers (SDRs), use the show sdr command in the appropriate configuration mode.

Administration EXEC Mode

show sdr [ name sdr-name [detail] | summary ]

EXEC Mode

show sdr [detail]

Syntax Description

name sdr-name

Specifies a specific SDR.

detail

Displays more detailed information for a specific SDR.

summary

Displays summary information about all SDRs in the system.

Command Default

Administration EXEC Mode Mode:

  • Displays information for the Owner SDR.
  • If you are logged into a specific SDR as the admin user, then information about the local SDR is displayed.

EXEC Mode Mode:

  • Displays information about the local SDR.

Command Modes

EXEC

Administration EXEC

Command History

Release

Modification

Release 3.7.2

This command was introduced.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

Use the show sdr command in administration EXEC mode to display the inventory of nodes in the Owner SDR or in a specific named SDR. The show sdr command in EXEC mode displays the inventory of nodes in the current SDR.

Task ID

Task ID

Operations

system

read

Examples

This example shows sample output from the show sdr command in

EXEC

mode: 
RP/0/RSP0/CPU0:router# show sdr
Thu Feb 15 04:09:06.179 PST

SDR Inventory
--------------

Type       NodeName   NodeState         RedState   PartnerName
---------------------------------------------------------------
RP(0)      0/RSP0/CPU0 IOS XR RUN        Active     0/RSP1/CPU0
RP(0)      0/RSP1/CPU0 NOT_PRESENT       Standby    0/RSP0/CPU0
LC(2)      0/1/CPU0   IOS XR RUN        NONE       NONE
LC(2)      0/4/CPU0   IOS XR RUN        NONE       NONE
LC(2)      0/6/CPU0   IOS XR RUN        NONE       NONE
Table 1  show sdr Field Descriptions

Field

Description

Type

Type of card, which can be Linecard, RP, or DRP.

NodeName

Name of the node, expressed in the rack/slot/module notation.

NodeState

Run state of the card, which can be failure, present, booting, running, and so on.

RedState

Redundancy state of the card, which can be active, standby, or none.

PartnerName

Partner of the card, expressed in the rack/slot/module notation.

This example shows sample output from the show sdr command in administration EXEC mode with the summary keyword: 

RP/0/RSP0/CPU0:router(admin)# show sdr summary
Thu Feb 15 04:13:27.508 PST

SDRs Configured:
SDR-Names   SDRid dSDRSC      StbydSDRSC  Primary1    Primary2    MacAddr
--------------------------------------------------------------------------
Owner       0     0/RSP0/CPU0 NONE        0/RSP0/CPU0 0/RSP1/CPU0  001d.e5eb.c0ae
Table 2  show sdr summary Field Descriptions

Field

Description

SDRid

Identifier of the SDR.

dSDRSC

Designated secure domain router shelf controller. This refers to the controller of the SDR.

StbydSDRSC

Standby DSDRSC. This refers to the standby controller of the SDR.

Primary1

Configured primary node.

Primary2

Configured primary node pair.

MacAddr

MAC address associated with the SDR.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

Related Support Community Discussions