clear canbus
To clear the counters used for statistics regarding the CAN bus, use the clear canbus command in administration EXEC mode.
clear canbus {client-stats | controller-stats | server-stats} location {all | node-id}
Syntax Description
client-stats |
Clears CAN bus client statistics. |
controller-stats |
Clears CAN bus controller statistics. |
server-stats |
Clears CAN bus server statistics. |
location {all | node-id} |
Clears the CAN bus statistics for a specific node or all nodes. |
Command Default
None
Command Modes
Administration EXEC
Command History
Release | Modification |
---|---|
Release 3.7.2 |
This command was introduced. |
Release 3.9.0 |
No modification. |
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Task ID
Task ID | Operation |
---|---|
sysmgr |
read |
Examples
The following example illustrates how to use the clear canbus command:
RP/0/RSP0/CPU0:router(admin)# clear canbus server-stats location all