Cisco ONS 15454 DWDM Troubleshooting Guide, Release 9.8

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 31, 2013

Chapter: New and Changed Information

New and Changed Information
- New and Changed Information

New and Changed Information

This topic provides the new and changed feature information for the Cisco ONS 15454 DWDM Troubleshooting Guide.

New and Changed Information

New and Changed Information

Table 1 New and Changed Features
Feature	Description	Release	Where Documented
CP-UNVER-CLEARED	Control Plane Unverified Cleared Alarm	9.6.0.3	Alarm Troubleshooting chapter: CP-UNVER-CLEARED Alarm
PWR-CON-LMT	Power Consumption Limit Alarm	9.6.0.3	Alarm Troubleshooting chapter PWR-CON-LMT Clear the PWR-CON-LMT Alarm
FIPS_TEST_FAILED	FIPS Test Failed Alarm	9.8	Alarm Troubleshooting chapter FIPS_TEST_FAILED Clearing the FIPS_TEST_FAILED Alarm
KEY_EX_FAIL	Key Exchange Fail Alarm	9.8	Alarm Troubleshooting chapter KEY_EX_FAIL Clearing the KEY_EX_FAIL Alarm
KEY_WRITE_FAIL	Key Write Fail Alarm	9.8	Alarm Troubleshooting chapter KEY_WRITE_FAIL Clearing the KEY_WRITE_FAIL Alarm
OVER-TEMP-UNIT-PROT	Over Temperature Unit Protection Alarm	9.8	Alarm Troubleshooting chapter OVER-TEMP-UNIT-PROT Clearing the OVER-TEMP-UNIT-PROT Alarm
SEQ_MISMATCH_COUNT	Sequence Mismatch Count Alarm	9.8	Alarm Troubleshooting chapter SEQ_MISMATCH_COUNT Clearing the SEQ_MISMATCH_COUNT Alarm
UNIT-HIGH-TEMP	Unit High Temperature Alarm	9.8	Alarm Troubleshooting chapter UNIT-HIGH-TEMP Clearing the UNIT-HIGH-TEMP Alarm

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)