Configuring High Availability Clusters
Before you begin
-
All IP addresses must be reachable and capable of communicating with each other.
-
All switches in the cluster must connect to all of the controllers.
-
All controllers must have the same HA clustering configuration information in the config.ini files.
-
All controllers must have the same information in the xnc/configuration/startup directory.
-
If using cluster passwords, all controllers must have the same password configured in the xncjgroups.xml file. See Password Protecting the High Availability Clusters.
Procedure
Step 1 |
Open a command window on one of the instances in the cluster. |
Step 2 |
Navigate to the xnc/configuration directory that was created when you installed the software. |
Step 3 |
Use any text editor to open the config.ini file. |
Step 4 |
Locate the following text:
|
Step 5 |
Example:IPv4 example.
Example:IPv6 example.
|
Step 6 |
Save the file and exit the editor. |