Installing Cisco VTS 2.6.2 Components in OpenStack using Red Hat Enterprise Linux OpenStack Director

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Installing Cisco VTS 2.6.2 Components in OpenStack using Red Hat Enterprise Linux OpenStack Director

Chapter Title

Sample neutron-cisco-vts.yaml Configuration

Results

Updated:
September 11, 2018

Chapter: Sample neutron-cisco-vts.yaml Configuration

Sample neutron-cisco-vts.yaml Configuration

This appendix provides typical sample configuration for different Cisco VTS deployment modes.

Sample “neutron-cisco-vts.yaml” for Deploying Cisco VTS Plugin with OVS Agent 

resource_registry:

  OS::TripleO::Services::NeutronCorePluginVTS: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-plugin-ml2-cisco-vts.yaml
  OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTS

  ## Comment out below line when deploying VTS Agent on compute nodes instead of VPP/VPFA
  OS::TripleO::Services::ComputeNeutronCorePlugin: OS::Heat::None

parameter_defaults:

  ###################
  ### VTS General ###
  ###################

  VTSUsername: 'admin'
  VTSPassword: 'YLdKnf3qSsKA2JWQT9a0Sg=='
  VTSServer: '10.194.132.26'
  VTSVMMID: '691ce4a4-dfa3-4b63-855c-5813519498da'

  ###################
  ### Neutron ML2 ###
  ###################

  NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'
  NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'
  NeutronTypeDrivers: 'vxlan,vlan,flat'
  NeutronServicePlugins: 'cisco_vts_router,trunk'

  ########################
  ### VTS Agent Config ###
  ########################

  VTSPhysicalNet: 'phys_tenant'
  #VTSRetries: 15
  #VTSTimeout:
  #VTSPollingInterval: 6

Sample “neutron-cisco-vts.yaml” for Deploying Cisco VTS Plugin with Cisco VTS Agent 

# A Heat environment file which can be used to enable Cisco VTS extensions, configured via puppet

# By default the configuration has items required to deploy VPP/VPFA on all nodes + the cisco ML2 VTS driver

resource_registry:

		OS::TripleO::Services::NeutronCorePluginVTS: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-plugin-ml2-cisco-vts.yaml
  OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTS

  ## Comment out below line when deploying VTS Agent on compute nodes instead of VPP/VPFA
  #OS::TripleO::Services::ComputeNeutronCorePlugin: OS::Heat::None

  ## Disable Neutron L3 agent that conflict with VPFA
  OS::TripleO::Services::NeutronL3Agent: OS::Heat::None

  ## OVS and VTS Agent sub-section ##

  ## Disable/enable the default OVS Agent for compute and controller
  OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None
  OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None

  ## Disable/enable VTS agent service. VTS agent and OVS agent are mutually exclusive
  ## NOTE: The OS::TripleO::Services::VTSAgent needs to be added to the deployment role file
  OS::TripleO::Services::VTSAgent: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-cisco-vts-agent.yaml

parameter_defaults:

  ###################
  ### VTS General ###
  ###################

  VTSUsername: 'admin'
  VTSPassword: 'YLdKnf3qSsKA2JWQT9a0Sg=='
  VTSServer: '10.194.132.26'
  VTSVMMID: '691ce4a4-dfa3-4b63-855c-5813519498da'

  ###################
  ### Neutron ML2 ###
  ###################

  NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'
  NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'
  NeutronTypeDrivers: 'vxlan,vlan,flat'
  NeutronServicePlugins: 'cisco_vts_router,trunk'
  NeutronOVSFirewallDriver: 'neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver'

  ########################
  ### VTS Agent Config ###
  ########################

  VTSPhysicalNet: 'phys_tenant'
  #VTSRetries: 15
  #VTSTimeout:
  #VTSPollingInterval: 6

Sample “neutron-cisco-vts.yaml” for Deploying Cisco VTS Plugin with VTF 

# A Heat environment file which can be used to enable Cisco VTS extensions, configured via puppet

# By default the configuration has items required to deploy VPP/VPFA on all nodes + the cisco ML2 VTS driver

resource_registry:

		OS::TripleO::Services::NeutronCorePluginVTS: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-plugin-ml2-cisco-vts.yaml
  OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTS

  ## Comment out below line when deploying VTS Agent on compute nodes instead of VPP/VPFA
  OS::TripleO::Services::ComputeNeutronCorePlugin: OS::Heat::None

  ## Disable Neutron L3 agent that conflict with VPFA
  OS::TripleO::Services::NeutronL3Agent: OS::Heat::None

  ## OVS and VTS Agent sub-section ##

  ## Disable/enable the default OVS Agent for compute and controller
  OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None
  OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None

  ## Disable/enable VTS agent service. VTS agent and OVS agent are mutually exclusive
  ## NOTE: The OS::TripleO::Services::VTSAgent needs to be added to the deployment role file
  #OS::TripleO::Services::VTSAgent: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-cisco-vts-agent.yaml

  ## VPFA Configuration Hook scripts
  #OS::TripleO::ComputeExtraConfigPre: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml

  ## Additional hook scripts for controller. Enable/disable as disctated by the scope of the deployment
  #OS::TripleO::ControllerExtraConfigPre: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml

  ## Same hook scripts as above for all nodes in one. Enable/disable as disctated by the scope of the deployment.
  OS::TripleO::NodeExtraConfig: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml

  ## Rsyslog client
  OS::TripleO::Services::RSyslogClient: /usr/share/openstack-tripleo-heat-templates/puppet/services/rsyslog-client.yaml
  OS::TripleO::Services::Vpp: OS::Heat::None
  OS::TripleO::Services::VppCompute: /usr/share/openstack-tripleo-heat-templates/puppet/services/vpp-compute.yaml
  OS::TripleO::Services::VppController: /usr/share/openstack-tripleo-heat-templates/puppet/services/vpp-controller.yaml
  OS::TripleO::Services::CiscoVpfaCompute: /usr/share/openstack-tripleo-heat-templates/puppet/services/cisco-vpfa-compute.yaml
  OS::TripleO::Services::CiscoVpfaController: /usr/share/openstack-tripleo-heat-templates/puppet/services/cisco-vpfa-controller.yaml



parameter_defaults:

  ###################
  ### VTS General ###
  ###################

  VTSUsername: 'admin'
  VTSPassword: 'YLdKnf3qSsKA2JWQT9a0Sg=='
  VTSServer: '10.194.132.26'
  VTSVMMID: '691ce4a4-dfa3-4b63-855c-5813519498da'

  ###################
  ### Neutron ML2 ###
  ###################

  NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'
  NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'
  NeutronTypeDrivers: 'vxlan,vlan,flat'
  NeutronServicePlugins: 'cisco_vts_router,trunk'

  ## DHCP Agent interface driver. Uncomment ONLY if/when deploying VPP on the controller node(s).
  NeutronInterfaceDriver: 'cisco_controller.drivers.agent.linux.interface.NamespaceDriver'

  ########################
  ### VTS Agent Config ###
  ########################

  VTSPhysicalNet: 'phys_tenant'
  #VTSRetries: 15
  #VTSTimeout:
  #VTSPollingInterval: 6

  ###################
  ### VPFA Config ###
  ###################

  UnderlayIpNewtorksList: '21.0.0.0/8'
  VTSR_u_IpAddressList: '21.1.1.5'
  #VPFAHostname: 'foo'
  #NetworkConfigMethod: 'static'
  #NetworkNameServerIP: ''
  VifTypeCompute: 'vhostuser'
  VifTypeController: 'tap'

  # Set common VTS Network Gateway address or set/override it in PerNodeData below
  VTSNetworkIPv4Gateway: '21.1.1.1'

  PerNodeData: |
    {
      "A73EB684-FE95-084D-8260-9052DFD50EEA": {
          "cisco_vpfa::vtf_underlay_ip_v4": "21.1.1.11",
          "cisco_vpfa::vtf_underlay_mask_v4": "24",
          "cisco_vpfa::network_ipv4_gateway": "21.1.1.1"},
      "90117168-52E8-074F-A159-8186CFBF7B5C": {
          "cisco_vpfa::vtf_underlay_ip_v4": "21.1.1.12",
          "cisco_vpfa::vtf_underlay_mask_v4": "24",
          "cisco_vpfa::network_ipv4_gateway": "21.1.1.1"}
    }

  #####################################
  ### VPP Configuration Parameters  ###
  #####################################

  ## MTU for Tun/tap interfaces
  VppTunTapMtu: '9000'

  ##The CPUs listed below need to be part of the grub isol CPU list (configured elsewhere)
  VppCpuMainCoreController: '6'
  VppCpuMainCoreCompute: '6'

  ## Comma delimited workers list
  VppCpuCorelistWorkersCompute: '7,8,9'
  VppCpuCorelistWorkersController: '7,8,9'

  ## Avoid dumping vhost-user shared memory segments to core files
  #VppVhostUserDontDumpMem: True


########################
      ### VTS Update Info  ###
      ########################

  VTSUpdate: 'true'

  RepoProxy: 'http://<>:80/'
  VTSUpgradeNewPackages: |
        "cisco-vts-puppet-tripleo", "cisco-vts-puppet-neutron",
        "monit", "cisco-vpfa-collectd-plugin", "cisco-vts-os-net-config",
        "vpp", "vpp-plugins", "vpfa", "cisco-vts-puppet-vpfa", "cisco-vts-puppet-fdio",
        "cisco-vts-os-util"

  VTSUpgradeNewForgePackages: |
       "wdec-monit --version 1.1.2", "puppetlabs-limits --version 0.1.0", "saz-rsyslog --version 5.0.0"

Node Depolyment Resources and Parameters

Table 1. Node Depolyment Resources and Parameters

Enable resource type in "neutron-cisco-vts.yaml" environment file

Config changes to Node Roles (/usr/share/openstack-tripleo-heat -templates/roles_data.yaml)

Cisco VTS plugin with OVS agent

OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTS

None

Cisco VTS plugin with Cisco VTS agent

OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTSOS::TripleO::Services::NeutronL3Agent: OS::Heat::NoneOS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::NoneOS::TripleO::Services::NeutronOvsAgent: OS::Heat::NoneOS::TripleO::Services::VTSAgent: /usr/share/openstack-tripleo-heat-templates/puppet/services/neutron-cisco-vts-agent.yaml

OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginVTSOS::TripleO::Services::ComputeNeutronCorePlugin: OS::Heat::NoneOS::TripleO::Services::NeutronL3Agent: OS::Heat::NoneOS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::NoneOS::TripleO::Services::NeutronOvsAgent: OS::Heat::NoneOS::TripleO::Services::RSyslogClient: /usr/share/openstack-tripleo-heat-templates/puppet/services/rsyslog-client.yaml

#Add VTS agent role for Controller- OS::TripleO::Services::VTSAgent #Add VTS agent role for Compute- OS::TripleO::Services::VTSAgent

Cisco VTS plugin with VTF

Cisco VTS plugin with VTF#Enable VPFA only on controllerOS::TripleO::ControllerExtraConfigPre: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml#Enable VPFA only on computeOS::TripleO::ComputeExtraConfigPre: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml#Enable VPFA on all nodes - Can be used instead of the above two options.OS::TripleO::NodeExtraConfig: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/cisco_vts_vpfa.yaml

#Add VTFA+VPP+Rsyslog roles for Controller- OS::TripleO::Services::VppController- OS::TripleO::Services::CiscoVpfaController- OS::TripleO::Services::RSyslogClient #Add VTFA+VPP+Rsyslog roles for Compute- OS::TripleO::Services::VppCompute- OS::TripleO::Services::CiscoVpfaCompute- OS::TripleO::Services::RSyslogClient

Table 2. Parameters/Values to Populate

Populate parameters in "neutron-cisco-vts.yaml"

Cisco VTS plugin with OVS agent

VTSUsername: '<username>'

VTSPassword: '<encrypted passphrase>'

VTSServer: '<IP-address>'

VTSVMMID: '<UUID>'

NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'

NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'

NeutronTypeDrivers: 'vxlan,vlan,flat'

NeutronServicePlugins: 'cisco_vts_router,trunk'

VTSPhysicalNet: '<physnet name>'

VTSUsername: '<username>'

VTSPassword: '<encrypted passphrase>'

VTSServer: '<IP-address>'

VTSVMMID: '<UUID>'

Cisco VTS plugin with Cisco VTS agent

NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'

NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'

NeutronTypeDrivers: 'vxlan,vlan,flat'

NeutronServicePlugins: 'cisco_vts_router,trunk'

NeutronOVSFirewallDriver: 'neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver'

VTSPhysicalNet: '<physnet name>'

VTSUsername: '<username>'

VTSPassword: '<encrypted passphrase>'

VTSServer: '<IP-address>'

VTSVMMID: '<UUID>'

NeutronCorePlugin: 'neutron.plugins.ml2.plugin.Ml2Plugin'

NeutronMechanismDrivers: 'sriovnicswitch,cisco_vts'

NeutronTypeDrivers: 'vxlan,vlan,flat'

NeutronServicePlugins: 'cisco_vts_router,trunk'

NeutronInterfaceDriver: 'cisco_controller.drivers.agent.linux.interface.NamespaceDriver'

VTSPhysicalNet: '<physnet name>'

UnderlayIpNewtorksList: '10.10.10.0/24,50.50.0.0/16,40.40.0.0/16,42.42.42.0/24'

VTSR_u_IpAddressList: '10.10.10.133,10.10.10.134'

# VPFA Configuration requires the assignment of an underlay IP address for the VPFA per node.

# This needs to be specified against the UUID of the target node in a JSON data blob.

# To derive the UUID, after node introspection execute the following CLI command steps:

# 1. 'ironic node-list'. Note Openstack ID of the target node

# 2. 'openstack baremetal introspection data save <Openstack ID from step1> | jq .extra.system.product.uuid

# 3. Note the Node UUID and use it in the json configuration blob below. Multiple nodes can be specified.

Cisco VTS plugin with VTF

 
PerNodeData: |
    {
      "01289991-C0F5-204C-9A71-43A2843F225B": {
          "cisco_vpfa::vtf_underlay_ip_v4": "10.123.10.10",
          "cisco_vpfa::vtf_underlay_mask_v4": "24",
          "cisco_vpfa::network_ipv4_gateway": "10.123.10.1"},
      "37B32CF6-FB12-3742-B709-7605835C33C8": {
          "cisco_vpfa::vtf_underlay_ip_v4": "31.31.31.30",
          "cisco_vpfa::vtf_underlay_mask_v4": "24",
          "cisco_vpfa::network_ipv4_gateway": "31.31.31.1"},
      "5F107171-A2C9-0540-BF5D-D1D904E87039": {
          "cisco_vpfa::vtf_underlay_ip_v4": "10.123.35.13",
          "cisco_vpfa::vtf_underlay_mask_v4": "24",
          "cisco_vpfa::network_ipv4_gateway": "10.123.35.1"}
    }

VppTunTapMtu: '8936'
VppCpuMainCoreController: '6'
VppCpuMainCoreCompute: '6'
VppCpuCorelistWorkersCompute: '7,8,9'
VppCpuCorelistWorkersController: '7,8,9'


  ClientLogFilters: |
    [
      {
        "expression": "$syslogfacility-text == 'local3' and $syslogseverity-text == 'crit'",
        "action": "@[<IP ADDRESS>]:514;forwardFormat"
      },
      {
        "expression": "$syslogfacility-text == 'local3' and $syslogseverity-text == 'err'",
        "action": "@[<IP ADDRESS>]:514;forwardFormat"
      },
      {
        "expression": "$syslogfacility-text == 'local3' and $syslogseverity-text == 'warning'",
        "action": "@[<IP ADDRESS>]:514;forwardFormat"
      },
      {
        "expression": "$syslogfacility-text == 'local3' and $syslogseverity-text == 'info'",
        "action": "@[<IP ADDRESS>]:514;forwardFormat"
      }
    ]

Was this Document Helpful?

FeedbackFeedback

Contact Cisco