The 'scope' mode causes each scope to track its own free-address level independently. This is an IPv4 only mode.
The 'network' mode causes all of the scopes configured by this object to aggregate their free-address levels if they share
a 'primary-subnet'. This is an IPv4 only mode.
The 'selection-tags' grouping causes scopes to aggregate their free-address information together if they share a primary-subnet
and if their lists of selection tags match exactly. This is an IPv4 only mode.
The 'prefix' mode causes each prefix to track its own free-address level independently. This is an IPv6 only mode.
The 'link' mode causes all of the prefixes configured by this object to aggregate their free-address levels if they share
a link. This is an IPv6 only mode.
The 'v6-selection-tags' grouping causes prefixes to aggregate their free-address information if they share a link, and if
their lists of selection tags match exactly. This is an IPv6 only mode.
The 'countonly' and 'v6-countonly' groupings are used for the built-in aggregation objects that are used to provide top-utilized
information when no traps are configured. No traps will be fired for these modes.
|