The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides examples of what BGP-LS and PCEP configurations look like. To access the relevant configuration files, navigate to the /opt/cisco/controller/etc/opendaylight/karaf directory and open them in a text editor to make any necessary changes. The values you need to specify for your setup will differ from the ones provided here.
router bgp 65504 bgp router-id 30.30.30.30 bgp cluster-id 30.30.30.30 address-family ipv4 unicast network 46.0.0.30/32 network 49.0.0.30/32 network 55.0.0.30/32 network 56.0.0.30/32 ! address-family link-state link-state ! neighbor 198.18.1.25 remote-as 65504 update-source MgmtEth0/0/CPU0/0 address-family ipv4 unicast route-reflector-client ! address-family link-state link-state route-reflector-client ! !
router isis pce-poc is-type level-2-only net 72.0000.0000.0030.00 distribute bgp-ls level 2 address-family ipv4 unicast metric-style wide mpls traffic-eng level-2-only mpls traffic-eng router-id Loopback0 redistribute static ! interface Loopback0 address-family ipv4 unicast ! ! interface GigabitEthernet0/0/0/0 point-to-point address-family ipv4 unicast
ipv4 unnumbered mpls traffic-eng Loopback0 interface Loopback0 ipv4 address 30.30.30.30 255.255.255.255 ! interface MgmtEth0/0/CPU0/0 ipv4 address 198.18.1.57 255.255.255.0 ! interface GigabitEthernet0/0/0/0 ipv4 address 57.0.0.30 255.255.255.0 !
mpls traffic-eng interface GigabitEthernet0/0/0/0 ! interface GigabitEthernet0/0/0/1 ! interface GigabitEthernet0/0/0/2 ! interface GigabitEthernet0/0/0/3 ! interface GigabitEthernet0/0/0/4 ! pce peer ipv4 198.18.1.25 ! stateful-client instantiation ! ! auto-tunnel pcc tunnel-id min 1 max 99 ! reoptimize timers delay installation 0