First Published: August 31, 2023

Introduction

This document contains the following information about Cisco Evolved Programmable Network Manager 7.1:

New Functionality Added

This section lists the new features/functionalities delivered in Cisco EPN Manager 7.1.

Device Support

  • Support for IOS-XR 7.9.2 release on Cisco NCS 540 devices

  • Support for IOS-XR 7.9.2 release on Cisco ASR 9000 64 Bit routers

  • Support for IOS-XR 7.9.2 release on Cisco NCS 560 devices

  • Support for IOS-XR 7.9.2 release on Cisco NCS 8000 series devices

  • Support for IOS-XR 7.9.2 release on Cisco NCS 5500 devices

  • Support for IOS-XR 7.9.2 release on Cisco NCS 5700 devices

  • Support for Cisco NCS 2000 devices release 11.1.3

  • Support for IOS-XE 17.10.1 release on Cisco ASR 900 devices and Cisco ASR 920 devices

  • Support for IOS-XE 17.10.1 release on Cisco NCS 4200 series devices

  • Support for IOS-XR 7.9.1 release on Cisco NCS 1004 devices

  • Support for Cisco N540-FH-AGG-SYS (5G access) aggregation router with IOS-XR 7.8.1

  • Support for Cisco NCS2002-DC2 device (release 11.1.3)

  • Support for IOS-XR 7.8.1 release on Cisco NCS-57D2-18DD-SYS fixed chassis

  • IPv6 support for Cisco NCS 1010 devices

  • Chassis view support for Cisco N540-FH-AGG-SYS (5G access) aggregation router with IOS-XR 7.8.1

  • Support for the Cisco NCS 1004 device 7.3.1 release features

  • Support for the Cisco NCS 1004 device 7.3.2 release features

  • Support for the Cisco NCS 1004 device 7.5.1 release features

  • Support for the Cisco NCS 1004 device 7.5.2 release features

  • Support for the Cisco NCS 1004 device 7.7.1 release features

  • Support for the Cisco NCS 1004 device 7.8.1 release features

  • Support for Smart SFP on IOS-XR 7.8.1 release (Cisco ASR 9000 routers, Cisco NCS 5500 devices, Cisco NCS 540 devices) - Service Discovery Validation

  • Support for Cisco NCS1K4-QXP-K9 line card on Cisco NCS 1004 devices

  • Support for enhanced scale validation

GUI - General

  • Smart License Dashboard Page cleanup

  • Support for SONET-4-APSMM syslog and Reactive Inventory (MR-92)

  • Integration of Cisco WAN Automation Engine and Cisco EPN Manager based on HTTPs

  • Debuggability: Request to add an option to generate a support package bundle

  • Enhanced status display for PW and EVPN links

Software Support

  • Support for ESXi 7.0 Update 3g release

  • Upgrade to Red Hat Enterprise Linux 8 (RHEL 8)

  • Support for ESXi 8 release

Optical

  • Link protection (1+1 Trunk protection) for Cisco NCS1K4-QXP-K9 line cards on Cisco NCS 1004 devices

Inventory

  • Support Optical SFP PM reports for Cisco 8201 routers, Cisco NCS-57B1-5DSE-SYS router, Cisco NCS-57B1-6D24-SYS routers, and Cisco ASR 9903 routers to generate PM Data

Licensing

  • Achieve consistent Smart Licensing behavior across Cluster and Non-Cluster versions of Cisco EPN Manager

Functionality Changes Including Removed/Disabled Features

Following features/functionalities/Menus were deprecated in Cisco EPN Manager 7.1.

  • General Features:

    1. Syslog Settings:

      • Administration > Settings​ > Logging - Syslog

New Operating System Support

This section lists the new OS support provided in Cisco EPN Manager 7.1. For a list of all support information, click the gear icon at the top-right of the web GUI and choose Help > Supported Devices.

Cisco Network Convergence System 1004 —New Operating System Support

Device Model Device OS
Cisco NCS 1004 Router IOS-XR 7.9.1

Cisco Network Convergence System 540 Series Routers—New Operating System Support

Device Model Device OS
Cisco NCS 540 Router IOS-XR 7.9.2

Cisco ASR 9000 Series Aggregation Services Routers—New Operating System Support

Device Model Device OS
Cisco ASR 9000 64-Bit Router IOS-XR 7.9.2

Cisco Network Convergence System 560 Series Routers—New Operating System Support

Device Model Device OS
Cisco NCS 560 Router IOS-XR 7.9.2

Cisco 8000 Series Routers—New Operating System Support

Device Model Device OS
Cisco 8000 Router IOS-XR 7.9.2

Cisco Network Convergence System 5500 Series—New Operating System Support

Device Model Device OS
Cisco NCS 5500 Series IOS-XR 7.9.2

Cisco Network Convergence System 5700 Series Routers—New Operating System Support

Device Model Device OS
Cisco NCS 5700 Router IOS-XR 7.9.2

Cisco ASR 900 Series Aggregation Services Routers—New Operating System Support

Device Model Device OS
Cisco ASR 900 Router IOS-XE 17.10.1
Cisco ASR 902 Router IOS-XE 17.10.1

Cisco Network Convergence System 4200 Series—New Operating System Support

Device Model Device OS
Cisco NCS 4200 Series IOS-XE 17.10.1

Supported Installation/Upgrade Paths

The following table lists the valid paths for installing/upgrading to Cisco EPN Manager 7.1 from previous versions.

Current Cisco EPN Manager Version

Installation Path to Cisco EPN Manager 7.1

Cisco EPN Manager 6.0.1.1

 Cisco EPN Manager 6.0.1.1 > 7.1

Cisco EPN Manager 6.1.1

Cisco EPN Manager 6.1.1 > 7.1

Cisco EPN Manager 7.0.1

Cisco EPN Manager 7.0.1 > 7.1

See the relevant installation guide for installation prerequisites and procedures for Cisco EPN Manager versions.

For point patch installation instructions, see the readme file supplied with the patch file on the on the Software Download site on Cisco.com.

Important Notes

Cisco EPN Manager software is distributed with all the components necessary for its optimized and secure operation, including the Red Hat Linux operating system and the Oracle database. All security-related configurations, regression testing, performance, and scalability metrics are based on the set of components and configurations included in the original Cisco EPN Manager software distribution. Cisco provides periodic EPN Manager software updates that can also contain necessary updates to the packages installed on the operating system or to the database.

Note that if any of the following changes are made to the original distributed Cisco EPN Manager software, Cisco will no longer support the operating environment:

  • Configuration changes to the software or operating system, or installation of other components that are not part of the original distribution.

  • Direct installation and application of third-party software on the Red Hat Linux operating system embedded within Cisco EPN Manager.

  • Application of updates or patches that are not provided by Cisco to individual Cisco EPN Manager components.

  • Changes to the internal Cisco EPN Manager settings that are not documented as modifiable in the Cisco EPN Manager User and Administrator Guide on Cisco.com, as these changes may weaken security, disable functionality, or degrade scalability and performance.

Upgrade Issues

  • FTP and TFTP are disabled by default.

  • Active Threshold Crossing Alarms (TCA) for temperature remain active and are not cleared automatically. Clear these alarms manually.

  • You must resync your devices to view ISIS links.

  • You must resync LDP-enabled devices to view LDP feature-related information.

  • You must recreate the TCAs for inbound/outbound errors and inbound/outbound discards in the Interface Health monitoring policy.

Limitations on Carrier Ethernet Circuit Provisioning

  • Promotion of service using old probe name format is now supported. These probes are listed in the user interface with the appropriate standard OAM Profile name after promotion.

  • Sample profile: profile PM2_3_8_CoS5_DM type cfm-delay-measurement.

  • While custom profile names are supported in EPN Manager, modifying brownfield services with a different naming format deletes the existing custom profile and adds a new profile with a supported naming format.

  • Inventory models do not correctly display the profiles that are not associated to a service.

  • Validation limit for number of profiles is 100. If you create a new SLA operation profile after 100 existing profiles, the device generates an error and deployment fails.

TLS 1.2 Required for Secured Channel Communication for HTTPS and TLS

Only Transport Layer Security (TLS) 1.2 is supported for HTTPS and TLS related secured communication, for example, RADIUS EAP-TLS.

Support for TLS 1.0, TLS 1.1, and all versions of SSL has been disabled due to security vulnerabilities.

This means that all peer systems and clients that transact with Cisco EPN Manager using HTTPS/TLS must support TLS 1.2. If they do not support TLS 1.2, you must upgrade these systems. Wherever possible, the Cisco EPN Manager documentation highlights the potentially affected systems. Contact your Cisco representative for support in this regard, if necessary.

Reconciliation Report Limitations

If you have not provided a value for an attribute while provisioning a service, the provisioned value for that attribute is displayed as “Missing” in the reconciliation report. The device may have a default value for this attribute, but Cisco EPN Manager does configure this value.

Limitations on Cisco ME 1200 Devices

The Y.1564 performance test does not work if the source/destination is a Cisco ME 1200 device.

Limitations on Cisco NCS 4200 Devices Running IOS-XE 16.8.1

The following functionalities do not work on Cisco NCS 4200 devices running IOS-XE 16.8.1:

  • Alarm profile

  • Configuration of SONET LOP and CT3 LOP from the GUI

  • Admin shut/no shut functionality on SONET/T1/T3 HOP/LOP

Limitations on Cisco NCS 540 and Cisco NCS 5500 devices

Cisco NCS 540 and Cisco NCS 5500 device series do not support Fault-OAM, Wrap-Protection, and BFD.

Use CLI Templates for Configuring PTP Commands

On ASR920 devices with software version 16.9.1, IEEE 1588-2008 BC/MC license is required to execute the 1588 PTP commands.

Configuration and Inventory Not Supported for PTP Templates

The behavior of modeling the configurations pushed through PTP templates may not work as expected because the model may not be in place for all the configurations pushed through PTP templates. Configuration/Inventory is not supported for these configurations.

Deprecation of Support for ONS 10.00.10, 10.01.00, 10.03.00

ONS 10.00.10, 10.01.00, 10.03.00 ONS 10.00.10, 10.01.00, and 10.03.00 are no longer supported on Cisco NCS 2002, Cisco NCS 2006, and Cisco NCS 2015 devices.

Data Center Device Lifecycle Support Only

Cisco EPN Manager provides sssential support for a few selected UCS compute systems, Nexus series devices, and the CSR 1000v devices.

LINK_DOWN alarm on sub interfaces in Gig Port

LINK_DOWN alarms will not be generated when link is down on sub interfaces in a Gig Port.

Cisco EPN Manager Bugs

Open Bugs

The following criteria are used to create the list in the table below, which includes all the open bugs in Cisco EPN Manager 7.1 release:

  • Severity 1, 2, and high priority severity 3 open bugs

  • All open customer-found bugs

  • High-impact bugs that are likely to affect Cisco EPN Manager workflows.

Click the identifier link to view the impact and workaround for the bug in the Bug Search Tool. Use this tool to track the status of the open bugs.

Bugs Description
CSCwf76966

I159 B: MLT view doesn't display the 2K ports information in the OCH layer

CSCwh00835

BITS Interface disappearing upon device full sync

CSCwh22670

161 A: Overlay and MLT are not working for SR policies and overlayed L2VPN

Resolved Bugs

The table below lists all the bugs that were resolved in Cisco EPN Manager 7.1 release.

For more information about the resolved bugs, go to the Bug Search Tool.

Bugs Description
CSCwe29279 DB connection leak in the inventory module
CSCwe29295 DB Connection leak from the NBI-restconf
CSCwe78841 Critical CVE in component shiro, upgrade to the latest version.
CSCwf04765 No new archive is collected, even when the device configuration is changed.
CSCwf61127 [BnR]-6.0.1.1--7.1GA - Not able to launch the report as an admin user
CSCwf83560 Cisco EPNM Privilege Escalation Vulnerability
CSCvk01767 Administration/system settings - Network and Devices/SNMP backhoff algorithm is not saved after restart
CSCwa78453 Sub-menus are missing in the settings page (enable/disable menus page)
CSCwb73207 Sanitized config archive encrypts the word "encrypt" instead of the actual password
CSCwe04031 Time axis is abnormally shifted in the CPU utilization graph on the Dashboard/Device Trends GUI
CSCwe07091 Cisco Evolved Programmable Network Manager Command Injection Vulnerability
CSCwe13078 In 7.0GA, Issues in terminating Users Active Sessions
CSCwe20820 Incorrect bar graphs shown in circuit 360 view for traffic in and traffic out
CSCwe22487 Device memory collection has unnecessary memory types on XR devices
CSCwe30780 Zero values shown in device sensors dashboard
CSCwe36146 Optical legacy (non-wson) circuits are in partial discovery state
CSCwe43155 Loopback interface is removed when changing sonet from protected to working with ACR configuration.
CSCwe48733 Error while running Combined Inventory Report
CSCwe50025 On Modifying Switch Operational job Interval, the job type is changed from CronJob to SimpleJob
CSCwe51581 Alarm severity change of Configuration archive alarms (system) is reflected in UI only.
CSCwe57774 Show interfaces non-dynamic support is not working for IOS XR 6.9.1 onwards
CSCwe58359 EPNM 6.1.1 - "A Side" and "Z Side" information are missing for Circuit/VC Serial V.24 (RS232)
CSCwe61615 REPT EVT FXFR events issue, exception is observed in nms-optical-fault log. GUI is not displaying the events
CSCwe67037 Incorrect port view/status of WSE
CSCwe75027 Importing Action Profile does not import all data (for example, no queueing action data is imported)
CSCwe81681 Optical Interfaces reports generation fails to work for > 1 Week
CSCwe92074 Distribution using FTP Protocol is not working
CSCwf12764 Optical devices active alarms are purged after the configured time period
CSCwf14440 Changing device name from CTC will not update Display name column in networkresource DB table
CSCwf15468 Cisco EPNM Stored Cross-Site Scripting Vulnerability
CSCwf26914 The wson circuit constraint is not reconciled when changes are made via TL1/CTC and circuit is renamed.
CSCwf27696 EPNM 7.0: Terminate session of non-root user terminates root login as well
CSCwf28387 Software distribution fails when bootflash directory has a special character on a file name
CSCwf34720 Creation of Restconf Notification Destination name with .xml and .json must not be allowed
CSCwf36251 Dashboard UI- Network Summary - Alarm Summary and System Health are not working
CSCwf38072 Line Card module down alarms are not cleared when alarms are raised via device sync
CSCwf38560 EPN Manager 5.1.2 Device Config BKP_External JOB next start time gets extended each time
CSCwf44789 Administrative Shutdown alarm does not clear the data
CSCwf47364 CLI template deploy fails on few Cisco NCS 540L devices
CSCwf50786 Chrome v114 update - UI regressions because of 'popover' attribute usage
CSCwf56095 The MCN broker DLQ auto purge needs to be supported
CSCwf59696 Alarm policies GUI is not showing optical alarm in the event types
CSCwf61693 Updating Hostname does not update the FDN for some of the RESTCONF data
CSCwf66430 Cisco NCS 2000 devices - Alarm description is missing for some events or alarms which are key to it.
CSCwf66785 TNC node controller card reset is not updating (ACT-STBY) LED on chassis view
CSCwf69749 EPNM 7.0.1: Alarm Notification Policies cannot be created in Japanese language
CSCwf72998 Broken MLT because of partial links
CSCwf83124 EPNM 7.0 allows read-only users of role 'Monitor Lite' to add/modify AAA settings incorrectly
CSCwf85011 SNMP Engine ID mismatch between snmp request from EPNM and devices
CSCwf94148 Nice component: Remove stale entry from NICEREPORTER and NICEREPORTER_NLBSNSSKY
CSCwh67231 User with user_role 'admin' is not admitted to access 'Report Launchpad'
CSCwh74116 Report launchpad privileges are missing
CSCwj79168 EPNM SWIM Device Image import failure
CSCwk74884 SWIM operations are not supported with GISO image for Cisco NCS 5500 devices
CSCwb88678 UDF filtering in network devices page ignores group selection
CSCwe15709 Few SyncE Links are missing between devices configured with external clocks
CSCwe22306 EPNM 6.1.1 - Device Sync of the 3rd Party device completes with CWW
CSCwe24000 Topological-link API taking more time for data response
CSCwe74159 New telnet timeout value is ineffective while using Save button in credential profile edit page
CSCwf05286 The Favorites menu gets blocked on Network Inventory page
CSCwf05299 RESTCONF API guide - Spell Error in Alarm Retrieval API
CSCwf06530 EPNM 5.1.4: Edit ethernet interface on ASR 903/920 from EPNM has no effect
CSCwf08688 Misleading error msg in config archive log, config archive job page, and api endpoint response
CSCwf10044 Proper restconf API reject msg for improper combination of elementType and Device Level Filters
CSCwf15129 Satellite link is not displayed
CSCwf32252 Deprecated APIs must be removed from programming guides
CSCwf35144 The \u2018select all\u2019 checkbox does not exist to select all the devices after a filter is applied.
CSCwf41373 User document or sizing guide needs update about the OPTICAL_CDB_SIZE in ncsTuning.env
CSCwf42682 EPNM fails to validate matched trunk rate based on string names such as RGN-100G and TXP-100G
CSCwf48823 Vague https code 500 for super/non-super user while opening sec tab on config tab of chassis view
CSCwf57133 Alert mail for info alarms does not mention the device name (only ip address)
CSCwf58489 Show version does not show the correct version. It displays 7.0.0 (add on is shown)
CSCwf63286 Unreadable chars in SSO Server Settings 'Ticket Granting Ticket Timeout' tooltip text message
CSCwf70265 Enabling Auto Provisioning of Work Port Properties for srv policy does not clear the filled C-Band and W/F fields
CSCwf71725 OCH managed link names do not get updated after renaming a Cisco NCS 2006 device
CSCwf76173 Unsupported URI needs to be removed from Restconf API documentation
CSCwh00765 Monitoring policies sheet to be updated with 30 secs/15 m monitoring policy info for Cisco NCS 1000 devices
CSCwh04305 Hide the Syslog tab from EPNM Administration / Settings / Logging web page
CSCwh06350 EPNM 7.0.1: Save button is not enabled by typing a single digit number
CSCwk64295 Link Optical SFP report details needs an update
CSCwm05527 EPNM 7.1.2 User Guide changes for TACACS section
CSCwe64242 EPNM 7.0: Pictorial representation of SFP copper module is incorrect in Chassis View
CSCwe80346 EPN - UI - NCS 4216 stencil slot numbers are not correct
CSCwe83539 EPN - UI - applicaion/advanced search is deprecated, UI element still present
CSCwf38953 Acknowledge Alarm warning message is misleading and incorrect
CSCwj30418 Need to update the Device Configuration retention behavior in Admin Guide
CSCwk09556 Limitations in N2K banner configuration
CSCwd43992 TNCS-20 cards do not show any lights/indication in the EPNM GUI
CSCwe32887 Cisco ASR 9000 MOD200G MPA modules are not shown in the Chassis view
CSCwf04862 Missing inventory GI sync after flapping up/down event is stopped
CSCwf29675 Chassis view support for 3rd party transceivers (product ID: 1837160062, 1837023060, 1837023018)
CSCwf35278 EPNM chassis view support for card type 15454-40EX-MXP-C and chassis type 15454-SA_HD-DDR
CSCwf61779 Chassis view support for 3rd party transceivers (product ID: FTLX1672D3BCL-KG, FTLX1475D3BCL-KG)
CSCwc78979

CoherentDSP is giving an error in response to "post modify" operation
CSCwd12284

UI is not displaying Coherent port if device admin status is changed
CSCwe10728

Resource Pool collection error caused by the Main Interface value populated in EthernetSubInterface
CSCwe73405

Vulnerabilities in code mirror 3.19.0 CVE-2020-7760

Closed Bugs

The table below lists all the bugs that were closed in Cisco EPN Manager 7.1 release.

Click the identifier link to view the impact and workaround for the bug in the Bug Search Tool. Use this tool to track the status of the bugs.

Bugs Description
CSCwf27415

Getting failure message: Failure to establish a HTTPS Session" in change audit logs
CSCwf04753

In notification with respect to ODU Group protection admin/oper state are unknown, retrieved correctly on getTP
CSCwd64579

EPNM 7.0 LA/GA: Application Search is not working in Cisco EPN Manager main page
CSCwf50906

EPNM does not allow you to unset or remove the BPS value, but the device does
CSCwf84323

In Optics Port, RX/TX high threshold indicating an error
CSCwd09949

EPNM - model and report - transceivers not found or inaccurate in SFP report and NetworkInventory UI
CSCwf25966

Inverted commas are being added to Cisco NCS 2000 devices port description
CSCwe94660

Empty Client (Pluggable Port) message to be made more user-friendly
CSCwf10768

Only one Hundred GigE Ctrlr0/0/0/0 port has been updated in EPNM through GI/RI, rest all not updated
CSCwf25846

F128019: Cardmode set on Skinny BO, client & trunk bit rate incorrect error message wrt validation
CSCwf72324

A card operating mode was deleted by EPNM using the incorrect command
CSCwf76971

Odu-grup-mp is wrongly configured directly from the device, the device goes to CWW

Get Information about Cisco EPN Manager Bugs

Use the Bug Search tool (BST) to get the latest information about Cisco EPN Manager bugs. BST allows partners and customers to search for software bugs based on product, release, and keyword, and it aggregates key data such as bug details, product, and version.

Cisco EPN Manager bugs may be caused by defects in a device's platform or operating system. In such cases, the Cisco EPN Manager bug will be resolved when the hardware/operating system bug is resolved.

Procedure

Step 1

Log into the Bug Search Tool.

Step 2

To list all bugs for this version, click the Select from list hyperlink that is next to the Product field and select the product.

  1. Choose Cloud and Systems Management > Routing and Switching Management > Cisco Evolved Programmable Network (EPN) Manager and then select the required product version.

  2. When the results are displayed, use the filter and sort tools to find bugs according to their status, severity, how recently they were modified, if any support cases are associated with them, and so forth.

You can also search using bug IDs or keywords. For more information, click Help at the top right of the Bug Search page.

Accessibility Features

For a list of accessibility features in Cisco EPN Manager 7.1, contact accessibility@cisco.com.

All product documents are accessible. If you would like to receive the product documentation in audio format, braille, or large print, contact accessibility@cisco.com

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.