The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following sections detail the prerequisites for installing Cisco Elastic Services Controller:
The following table lists the virtual resource requirements for Cisco Elastic Services Controller:
|
Requirements (for 1000 VNFs/VM management) |
Description |
|---|---|
|
Virtual CPUs |
4 VCPUs |
|
Memory |
8 GB RAM |
|
Disk Space |
30 GB |
The following table lists the software requirements on OpenStack:
|
Requirements |
Description |
|---|---|
|
Supported Browsers |
Any of the following: |
|
OpenStack Version |
Any of the following: |
|
Requirements |
Your Information/ Notes |
|---|---|
|
For Pre-installation Configuration |
|
|
QCOW image location |
|
|
QCOW image |
|
|
VM per Instance |
|
|
IP address |
|
|
Subnet mask |
|
|
Hostname |
|
|
Domain name |
|
|
Gateway IP address |
|
|
Admin password |
|
|
ESC Release Package |
|
|
ESC.qcow2 |
An image file for booting up the ESC instance |
|
bootvm.py |
The installation script compatible with python 2.7.6 and Python 3.4 |
Feedback