The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco Broadband Access Center 3.9 Installation Guide describes general requirements and installation procedures for Cisco Broadband Access Center, which is referred to as Cisco BAC throughout this installation guide.
This chapter provides an outline of the other chapters in this guide, details information about related documents that support this Cisco BAC release, and demonstrates the styles and conventions used in the guide.
This chapter includes the following sections:
System integrators, network administrators, and network technicians can use this installation guide to install Cisco BAC on a Solaris or Linux operating system.
This guide includes the following chapter:
This document uses the following conventions:
Tip Means the following information will help you solve a problem.
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
You can view the marketing and user documents for Cisco Broadband Access Center at:
http://www.cisco.com/en/US/products/sw/netmgtsw/ps529/tsd_products_support_series_home.html
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
The following document gives you the list of user documents for Cisco Prime Network Registrar 8.1:
http://www.cisco.com/en/US/docs/net_mgmt/prime/network_registrar/8.1/doc_overview/guide/
CPNR_8_1_Doc_Guide.html
Note Cisco Network Registrar (CNR) is re-branded to Cisco Prime Network Registrar starting with the 8.0 release.
The following document gives you the list of user documents for Cisco Access Registrar 5.0:
http://www.cisco.com/en/US/docs/net_mgmt/access_registrar/5.0/roadmap/guide/PrintPDF/
ardocgd.html