- Configuring OSPF
- OSPF Stub Router Advertisement
- OSPF Update Packet-Pacing Configurable Timers
- OSPF Sham-Link Support for MPLS VPN
- OSPF Support for Multi-VRF on CE Routers
- OSPF Forwarding Address Suppression in Translated Type-5 LSAs
- OSPF Inbound Filtering Using Route Maps with a Distribute List
- OSPF Shortest Path First Throttling
- OSPF Support for Fast Hello Packets
- OSPF Incremental SPF
- OSPF Limit on Number of Redistributed Routes
- OSPF Mechanism to Exclude Connected IP Prefixes from LSA Advertisements
- OSPF Support for Unlimited Software VRFs per Provider Edge (PE) Router
- OSPF Area Transit Capability
- OSPF Per-Interface Link-Local Signaling
- OSPF Link-State Database Overload Protection
- OSPF MIB Support of RFC 1850 and Latest Extensions
- OSPF Enhanced Traffic Statistics for OSPFv2 and OSPFv3
- Configuring OSPF TTL Security Check and OSPF Graceful Shutdown
- OSPF Sham-Link MIB Support
- OSPF: SNMP ifIndex Value for Interface ID in OSPFv2 and OSPFv3 Data Fields
- OSPFv2 Local RIB
- OSPF Support for Forwarding Adjacencies over MPLS Traffic Engineered Tunnels
- Area Command in Interface Mode for OSPFv2
iproute_ospf
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- April 26, 2011
Feedback