connid
1
|
An integer between 1-32766. Relevant debug messages will be shown if the current IPSec operation uses this value as the connection
ID to interface with the crypto engine.
|
flowid 1
|
An integer between 1-32766. Relevant debug messages will be shown if the current IPSec operation uses this value as the flow-ID
to interface with the crypto engine.
|
FVRF
|
The name string of a virtual private network (VPN) routing and forwarding (VRF) instance. Relevant debug messages will be
shown if the current IPSec operation uses this VRF instance as its front-door VRF (FVRF).
|
IVRF
|
The name string of a VRF instance. Relevant debug messages will be shown if the current IPSec operation uses this VRF instance
as its inside VRF (IVRF).
|
peer group
|
A Unity group-name string. Relevant debug messages will be shown if the peer is using this group name as its identity.
|
peer hostname
|
A fully qualified domain name (FQDN) string. Relevant debug messages will be shown if the peer is using this string as its
identity; for example, if the peer is enabling IKE Xauth with this FQDN string.
|
peer
ipaddress
|
A single IP address. Relevant debug messages will be shown if the current IPSec operation is related to the IP address of
this peer.
|
peer
subnet
|
A subnet and a subnet mask that specify a range of peer IP addresses. Relevant debug messages will be shown if the IP address
of the current IPSec peer falls into the specified subnet range.
|
peer username
|
A username string. Relevant debug messages will be shown if the peer is using this username as its identity; for example,
if the peer is enabling IKE Extended Authentication (Xauth) with this username.
|
SPI 1
|
A 32-bit unsigned integer. Relevant debug messages will be shown if the current IPSec operation uses this value as the SPI.
|