Confirm That Upgrade Is Complete
Procedure
Step 1 |
Log in to Cisco UCS Manager to ensure that the HX nodes have no pending server activities. From tab check for all server activities. |
Step 2 |
Confirm that the HX nodes match the expected firmware version. In Cisco UCS Manager, from tab, verify for the correct firmware version. |
Step 3 |
Log in to any controller VM through SSH.
|
Step 4 |
Confirm the HyperFlex Data Platform version.
|
Step 5 |
Verify that the HX storage cluster is online and healthy.
|
Step 6 |
Verify that the datastores are up and are mounted properly on the ESXi host. From the HX controller VMs: # stcli datastore list From the ESXi host: # esxcfg-nas -l |
Step 7 |
Verify that the upgrade is complete and is successful. stcli cluster upgrade-status
|
Step 8 |
For each browser interface you use, empty the cache and reload the browser page to refresh the HX Connect content. |