Confirm That Upgrade Is Complete
Log in to Cisco UCS Manager to ensure that the HX nodes have no pending server activities.
Fromtab check for all server activities.
Confirm that the HX nodes match the expected firmware version.
In Cisco UCS Manager, fromtab, verify for the correct firmware version.
Log in to any controller VM through SSH.
Confirm the HyperFlex Data Platform version.
Verify that the HX storage cluster is online and healthy.
Verify that the datastores are up and are mounted properly on the ESXi host.
From the HX controller VMs:
From the ESXi host:
Verify that the upgrade is complete and is successful.
For each browser interface you use, empty the cache and reload the browser page to refresh the HX Connect content.