New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
SRTE BGP Color-Only |
Added new command for color-only (CO) bits in route map. |
10.2(3)F |
Guidelines and Limitations for Configuring SRTE Over Default VRF Configuring Extended Community Color at the Ingress Node Configuring Extended Community Color at the Egress Node Configuring Extended Community Color for Network/Redistribute Command at the Egress Node Configuring Extended Community Color for Default-Originate at the Egress Node |
|
SRTE Flow-based Traffic Steering |
Added support for Cisco N9K-C9332D-GX2B platform switches. |
10.2(2)F |
Guidelines and Limitations for Flow-based Traffic Steering for SRTE |
|
SRTE Manual Preference Selection |
Allows you to lockdown or shutdown an SR-TE policy or perform both; shutdown preference(s) of an SR-TE policy or an on-demand color template. Furthermore, allows you to force a specific preference to be active path option for SRTE policy and to force path re-optimization for all or a specific SRTE policy. |
10.2(2)F |
Under the Configuring Segment Routing for Traffic Engineering chapter: |
|
SRTE Usability Enhancements |
Added new show commands for SR-TE policy and introduced autocomplete for a few existing SR-TE policy commands to improve usability. |
10.2(2)F |
Under the Configuring Segment Routing for Traffic Engineering chapter: Guidelines and Limitations for SR-TE Verifying Configuration for Flow-based Traffic Steering for SRTE Verifying Configuration for MPLS OAM Monitoring Verifying the Segment Routing Configuration Verifying Configuration for SRTE Explicit-path Endpoint Substitution |
|
SR-MPLS |
Added support for SR-MPLS on N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for Segment Routing |
| No Feature updates | 10.2(1)F |
Feedback