Configuring an External Network
This procedure describes how to create an external network. You can have a single external network that can connect to multiple routers on the on-premises site, or you can have multiple external networks with multiple VRFs that you can use to connect to CCRs.
Before you begin
You must have a hub network created before you can create an external network.
Procedure
Step 1 |
In the left navigation bar, navigate to . |
||||||||||||||||||||
Step 2 |
Click Actions, then choose Create External Network.
|
||||||||||||||||||||
Step 3 |
Enter the appropriate values in each field as listed in the following Create External Network Dialog Box Fields table then continue.
|
||||||||||||||||||||
Step 4 |
When you have finished creating the external network, click Save. To verify that cloud routers were configured in Google Cloud, in your Google Cloud account, navigate to . You should see the cloud routers created for the different regions (note that you might have to click Refresh to bring up the newly-configured cloud routers). To see the IPSec sessions, navigate to . |