Supported SNMP MIBs
The SNMP MIB ftp://ftp.cisco.com/pub/mibs/v2/CISCO-WBX-MEETING-MIB.my is supported by Cisco Webex Meetings Server. Not all MIB variables are applicable to Cisco Webex Meetings Server or to all Cisco Webex Meetings Server deployment types. For example, data center related MIBs do not apply to Cisco Webex Meetings Server systems.
CWMS System Information MIBS
Object1 |
OID |
Description |
---|---|---|
cwCommSystemVersion Type: String |
.1.3.6.1.4.1.9.9.809.1.1.1 |
Cisco Webex system version. |
cwCommSystemObjectID Type: Autonomous |
.1.3.6.1.4.1.9.9.809.1.1.2 |
The sysObjectID as defined in SNMPv2-MIB. |
CPU-Related MIBs
Object |
Read/Write Privilege |
OID |
Description |
---|---|---|---|
cwCommCPUTotalUsage Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.1 |
Percentage of CPU usage by a host component. The total CPU usage contains CPU user usage, CPU system usage, and CPU nice usage. The CPU user time: CPU time spent in user space. The CPU system time: CPU time spent in kernel space. The CPU nice time: CPU time spent on low priority processes. |
cwCommCPUUsageWindow Type: Gauge32 |
RW |
.1.3.6.1.4.1.9.9.809.1.2.1.2 |
Duration (in seconds) before a notification (trap) is sent indicating a CPU usage has crossed a normal/minor/major threshold and remains at the new threshold. |
cwCommCPUTotalNumber Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.3 |
Number of CPUs on the system. |
cwCommCPUUsageTable Type: n/a |
Not-accessible |
.1.3.6.1.4.1.9.9.809.1.2.1.4 |
A list of CPU usage registers on the device. |
cwCommCPUIndex Type: Unsigned |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.1 |
Unique CPU identifier. Each CPU has its own usage and breakdown values. |
cwCommCPUName Type: String |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.2 |
CPU name. For example, Intel® Xeon™ CPU 3.00GHz. |
cwCommCPUUsage Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.3 |
Percentage of total CPU resources used. Usually GHz is used for measuring CPU power. Since GHz is too large for measuring some CPU usage categories, KHz is used as the measuring unit. The system speed multiplies by the fraction of each CPU section (for example, idle, nice, user) to get the CPU KHz for each category. KHz is used as the unit of measure for all the CPU categories in this table. |
cwCommCPUUsageUser Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.4 |
CPU power executed in user mode. |
cwCommCPUUsageNice Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.5 |
CPU power executed on low priority processes. Nice is a program found on UNIX and Linux. It directly maps to a kernel call of the same name. Nice is used to invoke a utility or shell script with a particular priority, thus giving a process more or less CPU time than other processes. |
cwCommCPUUsageSystem Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.6 |
CPU power executed in kernel mode. |
cwCommCPUUsageIdle Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.7 |
CPU power in idle status. |
cwCommCPUUsageIOWait Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.8 |
CPU power used when waiting for disk I/O to complete. |
cwCommCPUUsageIRQ Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.9 |
CPU power used when handling an interrupt request. |
cwCommCPUUsageSoftIRQ Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.10 |
CPU power used when handling a software interrupt request. |
cwCommCPUUsageSteal Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.11 |
CPU power used on other tasks when running in a virtualized environment. |
cwCommCPUUsageCapacitySubTotal Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.4.1.12 |
Current total CPU power. |
cwCommCPUMonitoringStatus Type: String |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.5 |
|
cwCommCPUCapacityTotal Type: Gauge32 |
RO |
.1.3.6.1.4.1.9.9.809.1.2.1.6 |
Overall CPU capacity. |
CWMS Memory Information
Object2 |
OID |
Description |
---|---|---|
cwCommMEMUsage Type: Gauge32 |
.1.3.6.1.4.1.9.9.809.1.2.2.1 |
Physical memory usage of the virtual machine. |
cwCommMEMMonitoringStatus Type: String |
.1.3.6.1.4.1.9.9.809.1.2.2.2 |
Monitoring status of the memory resource: closed (0)—Resource not available. open(1)—Resource is available. |
cwCommMEMTotal Type: Gauge32 |
.1.3.6.1.4.1.9.9.809.1.2.2.3 |
Total physical memory size (in KB) of the host. |
cwCommMEMSwapUsage Type: Gauge32 |
.1.3.6.1.4.1.9.9.809.1.2.3.1 |
Physical memory usage (in percentage) and swap memory usage of the host. |
cwCommMEMSwapMonitoringStatus Type: String |
.1.3.6.1.4.1.9.9.809.1.2.3.2 |
This object provides the monitoring status of memory and swap memory. closed (0)—The memory and swap memory status is available. open(1)—The memory and swap memory status is not available. |
Disk Usage
Object3 |
OID |
Description |
---|---|---|
cwCommDiskUsageCount |
.1.3.6.1.4.1.9.9.809.1.2.5.1 |
Count of how many disks (for example, local disk, remote disk, meeting recording disk) available in the system. |
cwCommDiskUsageIndex |
.1.3.6.1.4.1.9.9.809.1.2.5.2.1.1 |
Index of entries in the table that contain management information generic to the disk usage. |
cwCommDiskPartitionName |
.1.3.6.1.4.1.9.9.809.1.2.5.2.1.2 |
Disk partition name. For example, the partition /opt or /dev. |
cwCommDiskUsage |
.1.3.6.1.4.1.9.9.809.1.2.5.2.1.3 |
Current disk usage (in percentage) on the host. |
cwCommDiskTotal |
.1.3.6.1.4.1.9.9.809.1.2.5.2.1.4 |
Total disk space size (in MB) of this host. |
cwCommDiskMonitoringStatus |
1.3.6.1.4.1.9.9.809.1.2.5.3 |
Monitoring status of disk resources. close (0)—The disk usage status is not available. open (1)—The disk usage status is available. |