Intercloud Extender
Network
|
Complete the following fields for the
Intercloud Fabric Extender.
|
VM Manager
|
Choose a VM manager for the
Intercloud Fabric Extender.
|
Datacenter
|
Choose a data center in which to deploy the
Intercloud Fabric Extender.
|
Data Trunk
Network
|
Choose the trunk interface on the
Intercloud Fabric Extender
for data traffic.
|
Management Interface
Network
|
Choose the management interface on the
Intercloud Fabric Extender
for data traffic.
|
Management VLAN
|
Choose the VLAN for the management interface. This VLAN must
match the VLAN specified in the management IP pool policy.
|
Management IP Pool
Policy
|
Choose the IP pool policy for the management interface or create
a new IP pool policy.
See
Creating a Static IP Pool Policy
to create a new IP pool policy.
|
Separate Mgmt and Tunnel
Interface
|
Check this check box to use different VLANs for the management
interface and tunnel interface. If this check box is not checked, the same VLAN
is used for the tunnel interface and the management interface by default.
To
access this property, you must check the
Advanced check box.
|
Tunnel Interface
Network
|
Choose the tunnel interface on the
Intercloud Fabric Extender
for data traffic.
This
drop-down list displays only if you check the
Separate Mgmt and Tunnel Interface check box.
|
Tunnel VLAN
|
Choose the VLAN for the tunnel interface.
This
field displays only if you check the
Separate Mgmt and Tunnel Interface check box.
|
Tunnel IP Pool
Policy
|
Choose the IP pool policy for the tunnel interface or create a
new IP pool policy.
See
Creating a Static IP Pool Policy
to create a new IP pool policy.
This
drop-down list displays only if you check the
Separate Mgmt and Tunnel Interface check box.
|
Intercloud Extender
Placement/Association
|
ICX
|
(Microsoft environments only) Select the host for the
Intercloud Fabric Extender.
To
specify a data store for a
Primary Intercloud Extender and
Secondary Intercloud Extender, check the
Advanced check box and then check the
High Availability check box.
|
Host
|
Select the host for the
Intercloud Fabric Extender.
For
high availability, check the
Advanced check box and then check the
High-Availability check box to specify the host for
the
Primary Intercloud Extender and
Secondary Intercloud Extender.
|
Datastore
|
Select the data store for the
Intercloud Fabric Extender.
For
high availability, check the
Advanced check box and then check the
High-Availability check box to specify the data
store for the
Primary Intercloud Extender and
Secondary Intercloud Extender.
To
access this property, you must check the
Advanced check box.
|
Intercloud Switch Network
|
Complete the following fields for the Intercloud Fabric Switch
in the cloud.
To
access this property, you must check the
Advanced check box.
|
Management VLAN
|
Choose the VLAN for the management interface.
|
Management IP Pool
Policy
|
Choose the IP policy for the management interface or create a
new IP pool policy.
See
Creating a Static IP Pool Policy
to create a new IP pool policy.
|
Native VLAN
|
(Optional) Specify a native VLAN to use for your VM network in
vCenter. A native VLAN is useful in flat network environments when only one
VLAN is present.
|
VSG Service
Interface
|
To
access this property, you must check the
ICF Firewall (VSG) check box.
This
service interface is created on the
Intercloud Fabric
Switch
and is used to communicate with the
Intercloud Fabric Firewall
data interface.
|
VLAN
|
Choose the VLAN for the service interface. The VLAN is used to
communicate between the
Intercloud Fabric
Switch
and the
Intercloud Fabric Firewall
and can be a private VLAN, completely isolated from other VLANs.
|
IP Pool Policy
|
Choose the IP pool policy for the service interface or create a
new IP pool policy.
|
VSG Management
|
To
access this property, you must check the
ICF Firewall (VSG) check box.
|
VSG Management
VLAN
|
Choose the VLAN for the management interface. This VLAN is used
to manage the
Intercloud Fabric Firewall.
|