Cisco Service Control Usage Based Services Solution Guide, Release 5.0.x
Available Languages
Table of Contents
Cisco Service Control Usage-Based Services Solution Guide, Release 5.0.x
Configuring Gx Usage Monitoring (GUI) Configuring the External Quota Type
Attaching the Quota Profile to a Package
Defining a Rule Using the Quota Profile
Obtaining Documentation and Submitting a Service Request
Cisco Service Control Usage-Based Services Solution Guide, Release 5.0.x
Configuring Gx Usage Monitoring (GUI)
Overview
The goal of a usage-based service is to report:
- An event on detection of a new flow or service
- Usage volume per subscriber session
- Usage volume per subscriber flow
The Gx solution provides enhanced support for the usage monitoring and flow detection events. Usage monitoring events use the monitoring key instance to track the accounted instance. The Service Control Engine (SCE) bucket ID is used as the monitoring key per package. The SCE bucket can be mapped to a single service, a set of services, or the entire traffic of the subscriber.
The Policy and Charging Rules Function (PCRF) provisions event setting. The Cisco Service Control solution monitors and reports user traffic to the PCRF. The PCRF uses the monitoring key and threshold to select the traffic that requires monitoring. The PCRF sets a reporting even that is notified when the threshold is crossed.
For more information on the Gx interface, see the Cisco Service Control Mobile Solution Guide.
Gx Support
Gx is a Third Generation Partnership Project (3GPP) Diameter application. In a Gx-enabled network, a Gx reference point is located between a Policy and Charging Rules Function (PCRF) and a Policy and Charging Enforcement Function (PCEF). The Gx reference point is used for charging control and policy control by applying the Attribute Value Pairs (AVPs) relevant to the application.
The PCRF acts as a Diameter server and performs the following functions:
- Uses the Gx interface to provision Policy and Charging Control (PCC) rules to the PCEF.
- Uses the Gx interface to remove PCC rules from the PCEF.
- Handles policy-control decisions.
- Provides network control for the service data flow detection, gating, Quality of Service (QoS), and flow-based charging (except credit management) towards the PCEF.
- Receives session and media-related information from the Application Functions (AFs) and informs the AFs about traffic plane events.
The PCEF acts as a Diameter client and performs the following functions:
- Uses the Gx interface to send traffic plane events to the PCRF.
- Enforces policy, handles flow-based charging, and controls QoS and the handling of user plane traffic.
- Provides service data flow detection and counting as well as online and offline charging interactions.
- Reports changes in the status of service data flows.
For more information on how to configure and monitor the Gx support in SCE, see the Cisco Service Control Mobile Solution Guide.
Attribute Value Pair
This section provides details on the AVPs that are used for Gx enhancements. Table 1 lists the AVPs that are used for Gx enhancements.
Configuring Gx Usage Monitoring (GUI)
In the SCA BB GUI, you can create quota profiles that define the limits and action of each bucket and assign specific services to that bucket. You must then attach the quota profile to a package, define a quota rule for the package for the relevant service, and configure usage monitoring.
For details on configuring and managing quotas, see the Cisco Service Control Application for Broadband User Guide .
To configure Gx Usage Monitoring, complete the following steps:
Step 1
Select Gx Usage Monitoring as the External Quota Type. For details on how to configure the external quota type, see the ( “Configuring the External Quota Type” section .
Step 2
Step 3
Step 4
Step 5
Configuring the External Quota Type
Use Quota Profile Editor to configure the External Quota Type. To open the Quota Profile Editor, from Policies tab of the Service Configuration window, choose Configuration > Policies > Quota Settings .
The external quota type options are displayed in the upper part of the Quota Profile Editor, as shown in Figure 1 . The default quota type is Gy.
Click one of the External Type radio buttons:
- Gy—Enables the Gy interface adapter to be used for the external quota management. For more information, see the Cisco Service Control Mobile Solution Guide.
- SCE Subscriber API—Enables the external applications (policy servers) to connect directly to the SCE for subscriber provisioning. For more information, see Cisco SCMS SCE Subscriber API Programmer Guide.
- Gx Usage Monitoring—Enables the Gx interface to generate usage monitoring reports. For more information, see the Cisco Service Control Mobile Solution Guide.
Adding a Quota Profile
To add a quota profile, complete the following steps:
Step 1
The Add Quota Profile dialog box appears ( Figure 2 ).
Step 2
Step 3
Note If Gx Usage Monitoring option is selected, the grace period is set to 2 seconds and the Error Handling is set to Grant. The default value of grace period for Gx Usage Monitoring is 2 seconds.
The Add Quota Profile window closes.
The new profile is added to the list of profiles displayed in the left (Quota Profile Edit) pane.
Editing a Quota Profile
After you create a quota profile, you can configure each bucket separately. For Gx Usage Monitoring profiles, you can configure the following for each bucket:
- Bucket tab—Enter a monitoring name for the monitoring key.
- Service tab—Attach services to the bucket.
Note
To configure a quota profile, complete the following steps:
Step 1
The profile name and the individual buckets appear in the right pane ( Figure 3 ).
Figure 3 Quota Profile Editor-Quota Profile Edit Tab
The bucket ID is mapped to the monitoring key and the bucket name is mapped to monitoring name. Cisco SCA BB supports a maximum of 127 buckets for Gx Usage Monitoring.
Step 2
The Quota Bucket Editor window appears ( Figure 4 ).
Figure 4 Quota Bucket Editor—Bucket Tab
Attaching the Quota Profile to a Package
Attach the quota profile to the appropriate package.
To attach the quota profile to the appropriate package, complete the following steps:
Step 1
Step 3
Step 4
Figure 5 Package Settings—Quota Management Tab
Defining a Rule Using the Quota Profile
Add a rule to the package to define the action when the bucket exceeds its quota.
To add a rule, complete the following steps:
Step 1
in the right pane in the Policies tab of the Service Configuration window.
The Add New Rule to Package dialog box appears ( Figure 6 ).
Figure 6 Add New Rule to Package
Step 2
Step 3
For more information on configuring rules, see the Cisco Service Control Application for Broadband User Guide .
Usage Monitoring Reports
This section describes the components that are configured to generate usage monitoring reports.
The Cisco SCE supports a combination of subscriber management and reporting features. Subscriber management is achieved by using one of the following combinations:
- Subscriber Manager (SM) and PCRF (Gx).
- Subscriber Manager for login and Vendor Specific Attribute (VSA), Gx for subscriber package and VSA.
For subscriber reporting or charging RDR, Gy, and Gx+ are used.
For subscriber management, you must configure SCE in the same way for all the subscribers. The system might not work if Gx manages some subscribers and Subscriber Manager manages some subscribers. If subscribers use different configuration, select different packages to manage the subscribers. Figure 7 shows the components that are configured for usage monitoring reports.
Note • When VSA attributes are received from both Subscriber Manager and Gx, the last attributes are saved in the Cisco SCE DB. The Cisco SCE DB retains a record of old attributes.
Figure 7 System Components for Usage Monitoring Reports
To generate usage reports, you require:
- The Subscriber Manager and SCE subscriber attribute database—The Subscriber Manager database provides attributes to SCE in PUSH or PULL mode, and during the SCE restart. The SCE subscriber attribute database includes up to 20 attributes per subscriber.
- Radius or Sniffer Login Event Generator (LEG) subscriber attribute extraction—The LEGs provide the configured data to Subscriber Manager which in turn supplies the data to the SCE.
- SCE with Subscriber Manager subscriber attribute provisioning—The Gx interface in the SCE extracts up to 20 attributes from a Gx message and stores it in the SCE database. The Subscriber Manager provides a list of attributes to the SCE and each attribute contains:
–
- Appending subscriber attributes into the SCE Raw Data Records (RDRs)—The SCE provides the subscriber attributes as part of the subscriber RDRs, HTTP transaction RDRs, and video transaction RDRs. provides details of the subscriber attributes.
- Adding subscriber attributes to the Collection Manager (CM) database—The Collection Manager generates the common reports based on the mobile subscriber attributes such as per device, location, network type, and APN.
- Generating Mobile report—The Collection Manager or the SCA BB Reporter generates the mobile reports. Table 3 lists the mobile reports.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html .
Subscribe to What’s New in Cisco Product Documentation , which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Feedback