The objective of this article is to guide you to the System Performance page on the WAP4410 Wireless-N Access Point. This provides a faster way for a user to look at all the current status information related to the wired and wireless networks on the access point.
• WAP4410N Wireless-N
• 2.0.5.3
Step 1. Log in to the web configuration utility and choose Status > System Performance. The System Performance page opens:
The Wired section of the page contains the statistics for the wired network:
• IP address — Local IP address of the access point.
• MAC address — MAC address of the wired interface of the access point.
• Connection — Status of the wired network.
• Packets Received — Number of information packets received.
• Packets Sent — Number of information packets sent.
• Bytes Received — Number of bytes received.
• Bytes Sent — Number of bytes sent.
• Error Packets Received — Number of error packets received.
• Drop Received Packets — Number of packets being dropped after they are received.
The Wireless section of the page contains the statistics for the wireless network:
• Name — The wireless network/SSID that the statistics refer to.
• IP Address — Local IP address of the access point.
• MAC Address — MAC Address of the wireless interface of the access point.
• Connection — Status of the wireless networks of the access point.
• Packets Received — Number of information packets received for each wireless network.
• Packets Sent — Number of information packets being sent by each wireless network.
• Bytes Received — Number of bytes received for each wireless network.
• Bytes Sent — Number of bytes being sent by each wireless network.
• Error Packets Received — Number of error packets received for each wireless network.
• Drop Received Packets — Number of packets being dropped after they are received.
Step 2. (Optional) Click Refresh to update the system performance information on the page.