Access the Web Based Utility Of SPA2102 from a Connected Host

Available Languages

Download Options

PDF (81.6 KB)
View with Adobe Reader on a variety of devices
ePub (120.9 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (162.0 KB)
View on Kindle device or Kindle app on multiple devices

Updated:December 10, 2018

Document ID:SMB1937

Access the Web Based Utility Of SPA2102 from a Connected Host

Objective

This articles explains how to access the web configuration utility of the SPA2102 or SPA3102 phone adapter from a host. Accessing the web configuration utility of SPA2102 or SPA3102 is needed to configure various features including QoS, DHCP, Call forwarding, Port forwarding and many more.

This article is comprised of two parts:

• Connecting a host to the SPA2102 or the SPA3102

• Accessing the web interface of the SPA210

Applicable Devices

• SPA2102

• SPA3102

Connecting a Host to the SPA2102 or SPA3102

Step 1. Connect the host computer to the SPA2102 or SPA3102 phone adapter with an Ethernet network cable.

Step 2. On the SPA2102 or SPA3102 connect the Ethernet cable to the Ethernet port.

Access the Web Interface of the SPA210

Open any web browser and enter the default IP Address of SPA2102 or SPA3102. If there is no password set by default, the screen will show you the web configuration utility of the device. There are two logins, a user login and an admin login. The admin login has more features to be configured. You can either configure settings on router or voice.

Note: The default IP Address of the SPA2102 or SPA3102 is 192.168.0.1.

Was this Document Helpful?

Access the Web Based Utility Of SPA2102 from a Connected Host

Available Languages

Download Options

Objective

Applicable Devices

Connecting a Host to the SPA2102 or SPA3102

Access the Web Interface of the SPA210

Was this Document Helpful?

Contact Cisco

Related Cisco Community Discussions

This Document Applies to These Products