Do-Not-Disturb Mode on the CVR100W VPN Router

Available Languages

Download Options

  • PDF     (48.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (89.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (70.6 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 17, 2017
Document ID:SMB4861

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Do-Not-Disturb Mode on the CVR100W VPN Router

Objective

The Do-Not-Disturb Mode turns off the LEDs on the front panel of the CVR100W Router. This feature makes the device more energy efficient.

This article explains how to enable the Do-Not-Disturb Mode on the CVR100W VPN Router.

Applicable Device

• CVR100W VPN Router

Software Version

• 1.0.1.19

Do Not Disturb Mode

Step 1. Log in to the web configuration utility and choose Administration > Do-Not-Disturb Mode. The Do-Not-Disturb Mode page opens:

Step 2. In the Do-Not-Disturb Mode field, check the Enable check box to turn off the LEDs on the front panel of the device.

Step 3. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco