Backup and Restore Configuration on the CVR100W VPN Router

Available Languages

Download Options

  • PDF     (141.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (183.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (90.9 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB4382

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Backup and Restore Configuration on the CVR100W VPN Router

Objective

The backup of a configuration of any particular device is done to save the current settings and implement them after an upgrade. Backup configurations and settings can be restored at any time. This article explains how to backup and restore the configuration on the CVR100W VPN Router.

Applicable Device

• CVR100W

Software Version

• 1.0.0.19

Backup / Restore Configuration

Backup Configuration

Step 1. Log in to the web configuration utility and choose Administration > Backup / Restore Settings. The Backup / Restore page opens:

Step 2. To save all the current settings and configuration on the device, click Backup Configuration.

Step 3. Choose a location and save the backup configuration file to your computer.

Restore Configuration

Step 1. Log in to the web configuration utility and choose Administration > Backup / Restore Settings. The Backup / Restore page opens:

Step 2. Click Browse to find the configuration file on your computer to apply to the device.

Step 3. Click Restore Configuration to start the restore operation. After the operation, the specified configuration file is restored to the router.

Note: After you click Restore Configuration, the router reboots.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco