PDF(127.0 KB) View with Adobe Reader on a variety of devices
ePub(165.7 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(93.1 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
Add Static DHCP on RV180 and RV180W
DHCP Servers assign IP addresses to devices on a LAN (Local Area Network) by storing a client's MAC address and the IP address assigned to that client. This is applicable for every VLAN subnet configured. The reserved IP address should be outside the configured DHCP pool of addresses.
This objective of this document is to explain how to Add, Delete or Edit client information to support static DHCP bindings on the RV180 and RV180W routers.
• RV180 • RV180W
Step 1. Use the router configuration utility to choose Networking > LAN (Local Network) >Static DHCP. The Static DHCP page opens:
Step 2. In the Static DHCPpage, click Add to add the IP Address and MAC Address in their respective columns.