Troubleshooting - Daylight Saving Time (DST) Does Not Update on RV220W
This article describes how to adjust the settings on RV220W so that it can update Daylight Saving Time (DST) on its own.
The daylight saving feature on RV220W sometimes doesn't update automatically and the time displayed doesn't change.
Note: Cisco recommends the device be upgraded to latest firmwares which will patch up this known Issues. To upgrade to the latest firmware visit https://www.cisco.com/cisco/software/type.html?mdfid=283118607&i=rs
• RV220W Wireless-N Network Security Firewall
Update Daylight Saving Time
Step 1. Use the configuration utility to choose Administration > Time Settings to open the time settings page. The Time Settings page opens.
Step 2. Click Enable Adjust Daylight Savings Time.
Step 3. In the NTP Server Configuration option, Select Default NTP Server radio button.
Step 4. Click Save to save the settings.
Step 5. After the time settings is saved the Firewall must be rebooted. To reboot the firewall, Click Administration > Reboot.
Note: Once the Firewall reboots, the device will automatically update the Daylight Saving Time from the NTP Server.