Access the Web-based Utility of RV220W and RV120W
Available Languages
Objectives
A Wireless-N firewall is an internet-sharing network solution that features highly secure connectivity to the Internet from remote locations and workers. It is a device that allows multiple hosts to access the same connection. The objective of this article is to explain the steps involved in accessing the web-based utility of RV220W or RV120W
Applicable Devices
• RV220W Wireless-N Firewall.
• RV120W Wireless-N Firewall.
Access the web-based utility
Note: To access the Web-based utility of any router, the PC and the router should be in the same network.
Default IP Address — 192.168.1.1
Default Username — cisco
Default password — cisco
Step 1: Open any browser and and enter the IP address of the device in to the Address bar.
Step 2: When the Login window is displayed, enter the username and password in the respective fields and click on Log In.
• Both the username and password fields are case-sensitive.
The Basic Settings page for the device Web Configuration Utility is displayed. If this is the first-ever login, you may be prompted to change the default log-in credentials
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)