Edit Security Mode of Access Points on RV120W and RV220W

Available Languages

Download Options

PDF (20.0 KB)
View with Adobe Reader on a variety of devices
ePub (72.3 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (151.0 KB)
View on Kindle device or Kindle app on multiple devices

Updated:August 17, 2017

Document ID:SMB1490

Edit Security Mode of Access Points on RV120W and RV220W

Objective

An access point's properties can be edited to make it only available at certain times of the day, restrict the number of endpoints that can use the access point, or separate the access point from the other wireless networks in the Cisco RV120W and RV220W devices.

Applicable Devices

• RV220W
• RV120W

Edit Access Point Properties:

Step 1. Choose Wireless > Basic Settings .The Basic Settings page opens:

Step 2. Check the box in the row of the Access Point that is to be edited.

Step 3. Click Edit Security Mode. The Security Settings page opens.

Step 4. Select name of SSID for which the security settings are to be changed.

Step 5. Click Enable or Disable to enable or disable Wireless Isolation within SSID.

Step 6. Enter relevant data for the security options.

Step 7. Click Save to save any changes made.

Edit Security Mode of Access Points on RV120W and RV220W

Available Languages

Download Options

Objective

Applicable Devices

Edit Access Point Properties:

Was this Document Helpful?

Contact Cisco

This Document Applies to These Products