Wireless Network Schedule Configuration on RV120W
The Cisco RV120W allows you to configure each of the four available wireless network on the router to be active during certain times of the day.
This document explains how to configure a schedule for a wireless network on the Cisco RV120W router.
Configuring Wireless Network (SSID) Scheduling
Step 1. Using the graphical user interface on the RV120W, choose Wireless > Basic Settings.
Step 2. In the Wireless Basic Settings Table, check the check box to the left of the wireless network that you want to configure.
Step 3. Click Edit SSID Scheduling. A new page will open.
Step 4. Choose the wireless network that you would like to configure a schedule for from the Select SSID drop-down menu.
Step 5. Check the Enable check box to allow you to create a schedule for the desired wireless network.
Step 6. Enter the start and stop times for the wireless network to be active.
Step 7. Click Save.
Step 8. Click Back to return to the Basic Settings page.