Explore Cisco
How to Buy

Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

Configuration of IP Mode on the RV220W and RV120W

Available Languages

Download Options

  • PDF     (6.9 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (49.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (69.5 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 10, 2018
Document ID:SMB1147
Configuration of IP Mode on the RV220W and RV120W

Objective

IP mode allows the user to gain access to the IPv6 functionality of the router or to remain with only IPv4 usage. The option IPv4 and IPv6 Dual-Stack will allow the user to gain access to the IPv6 functionality while retaining all IPv4 functionality. The IPv4-only mode allows the user only basic IPv4 functionality. The Internet is gradually moving towards IPv6 due to a lack of IP addresses under the current IPv4 mode.

This article explains the configuration of IP mode on the RV220W and RV120W.

Applicable Devices

• RV220W
• RV120W

Software Version

• v1.0.4.17

Configuration of IP Mode

Step 1. Log in to the web configuration utility and choose Networking > IPv6 > IP Mode. The IP Mode page opens:

 

Step 2. Choose either the IPv4-only or the IPv4 and IPv6 Dual-Stack IP Mode radio button.

• IPv4-only — Choose this option to configure only IPv4 properties.

• IPv4 and IPv6 Dual-Stack — Choose this option to be able to configure IPv6 and IPv4 properties.

Step 3. Click Save at the bottom of the configuration utility.

Revision History

Revision Publish Date Comments
1.0
10-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products