Field Notice: FN - 62117 - 15454-OC3-8 and 15454E-S1.1-8 Miscalibrated Optical Performance Manufacturing Data
Available Languages
Revised September 27, 2006
September 26, 2005
NOTICE:
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Products Affected
- 15454-OC3I8-1310
- 15454-OC3I8-1310=
- 15454E-S1.1-8
- 15454E-S1.1-8 =
Serial Numbers
| Random # |
|---|
|
SAG070871L0
SAG070871L4 SAG070871L9 SAG070871LK SAG07066VLU SAG07066VNB SAG07066VPX SAG070871JL SAG070871L2 SAG070871LU SAG07066VPD SAG070871J0 SAG070871LY SAG070871MV SAG07066VLY SAG07066VM2 SAG07066VPU SAG070871KA SAG07066VMD SAG07066VPQ SAG07066VQ1 SAG070871JW SAG070871LD SAG070871M5 SAG07066VLZ SAG07066VMM SAG07066VMP SAG07066VMT SAG07066VNQ SAG07066VNZ SAG07066VP7 SAG070871J9 SAG070871JD SAG070871K7 SAG070871KD SAG070871KN SAG070871L7 SAG070871L8 SAG070871LB SAG070871M1 SAG070871M3 SAG070871M8 SAG070871ME SAG070871MP SAG07066VLT SAG07066VM9 SAG07066VML SAG07066VP1 SAG07066VPA SAG07066VPF SAG07066VPS SAG07066VPZ SAG070871JK SAG070871JX SAG070871K1 SAG070871K9 SAG070871KC SAG070871KG SAG070871LG SAG070871LR SAG070871LS SAG070871LT SAG07066VLR SAG07066VM3 SAG07066VMB SAG07066VMG SAG07066VN2 SAG07066VNF SAG07066VNK SAG07066VNS SAG070871LP SAG070871MQ SAG07066VMY SAG070871JN SAG070871LJ SAG070871LZ SAG070871MA SAG070871ML SAG070871MU SAG07066VMQ SAG070871MR SAG07046JK3 SAG07046JK5 SAG07046JKE SAG07046JKM SAG07066VLP SAG070871KH SAG07046JKD SAG0701479H SAG0701479U SAG07046JKF SAG07046JKL SAG0701479M SAG0701479B SAG070871JJ SAG070871MM SAG070871LH SAG07066VM7 SAG070871LN SAG07066VPW SAG070871MS SAG070871LA SAG07066VM1 SAG070871K4 SAG070871M9 SAG07066VM0 SAG07066VMR SAG07066VN4 SAG07066VP2 SAG07066VPH SAG07066VPK SAG070871JE SAG070871K3 SAG070871KM SAG070871L1 SAG070871MK SAG07066VMF SAG07066VN0 SAG07066VNH SAG07066VPM SAG07066VPV SAG070871J4 SAG070871K0 SAG070871M0 SAG070871MC SAG070871MG SAG07066VMA SAG070871M6 SAG07066VMC SAG07066VMJ SAG07066VPR SAG070871JH SAG070871JP SAG070871JV SAG070871KK SAG070871L5 SAG070871LL SAG070871LW SAG070871M7 SAG070871MF SAG07066VMZ SAG07066VPB SAG07066VLX SAG07066VM6 SAG07066VMS SAG07066VMU SAG07066VNR SAG07066VP8 SAG070871JZ SAG070871K6 SAG070871KE SAG070871LM SAG07066VPL SAG070871JF SAG070871JM SAG070871LX SAG07066VNX SAG070871L3 SAG07014798 SAG0701479J SAG07046JKG SAG070871KQ SAG07014793 SAG0701479S SAG07046JKJ SAG07046JK6 SAG07014792 SAG0701479A SAG07046JK9 SAG07046JKC SAG07046JK4 SAG0701479W SAG07046JK0 SAG07014794 SAG07014795 SAG070871JY SAG070871K2 SAG070871JB SAG070871KB SAG07066VN1 SAG07066VN8 SAG07066VM4 SAG07066VM8 SAG07066VME SAG07066VMK SAG07066VMN SAG07066VMV SAG07066VMW SAG07066VP4 SAG07066VP9 SAG07066VPN SAG07066VPP SAG07066VPT SAG07066VPY SAG070871J5 SAG070871J6 SAG070871J8 SAG070871JA SAG070871JT SAG070871K5 SAG070871KJ SAG070871LC SAG070871LF SAG070871M4 SAG070871MT SAG070871KF SAG0701478Z SAG0701479K SAG07046JK7 SAG070871L6 SAG070871M2 SAG070871MN SAG070871MW SAG07014791 SAG0701479N SAG07046JKA SAG07066VLQ SAG070871JR SAG0701479F SAG0701479P SAG070871MH SAG070871JC SAG070871MJ SAG07066VND SAG070871K8 SAG07066VNL SAG07066VNN SAG07066VNP SAG07066VNY SAG07066VP0 SAG07066VP6 SAG07066VPC SAG07046JKH SAG07014790 SAG070871JQ SAG07066VLW SAG07066VM5 SAG07066VN6 SAG07066VNM SAG07066VNT SAG07066VNU SAG070871LV SAG07014797 SAG0701479C SAG0701479D SAG070871KZ SAG070871JU SAG07066VNV SAG07066VNW SAG070871LQ SAG07066VLV SAG07066VMX SAG0701479L |
Problem Description
The 8-port OC-3/STM-1 cards were raising false alarms (HI/LO LASERBAIS, HI/LO-TXPOWER, HI/LO-RXPOWER) on the Cisco Transport Controller (CTC) and the Cisco Transport Manager (CTM).Background
During release 6.0 development testing, SVT identified 8-port OC-3/STM-1 cards that were raising false alarms (HI/LO LASERBAIS, HI/LO-TXPOWER, HI/LO-RXPOWER).Problem Symptoms
Upon upgrading to release 6.0 or later software, systems installed with 8-port OC-3/STM-1 cards with mis-programmed data will have standing alarms for high-low laser bias, transmit power and receive power.
These alarms do not trigger any other service affecting software actions. Alarms will remain until the card is replaced with a correctly programmed card.
Workaround/Solution
There is no workaround in the field for these cards.
Please return the cards for replacements through an RMA.
How To Identify Hardware Levels
To identify the impacted cards, go to the inventory tab within CTC or CTM for the 15454 or 15454E and check the serial numbers against the list of serial numbers in the Serial Numbers section above.
Only the serial numbers listed in the Serial Numbers section of this Field Notice are impacted.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)