This document provides an understanding of the logs on the Cisco Customer Voice Portal (CVP) server and also outlines how to limit the amount of logs that are stored on the CVP Call server.
Cisco recommends that you have knowledge of these topics:
CVP Operations Console (OAMP)
The information in this document is based on these software:
CVP Server 9.0
CVP OAMP 9.0
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of an
Understand CVP Call Server Logs
Under the folder: C:\Cisco\CVP\conf you are able to see the config files for the CVP call server. If you open the file: log4j.xml, you will see the detail of the configuration for the logs.
There are two types of Call Server logs discussed in this document and they can be configured to be named as you want them to using these parrameters:
1- CVP Logs - Based on this configuration file, they are named this way: