How do I configure an RPX system on my Telepresence Server?

Introduction

This article relates to Cisco TelePresence Server 7010.

Q. How do I configure an RPX system on my Telepresence Server?

A. Follow the procedure below to configure a two-screen RPX system on the Telepresence Server:

1. Log into the Telepresence Server, go to Endpoints > Add grouped endpoints.

2. Enter a name for the system and the addresses (separated by a comma) in the order of the screens from left to right.

3. Click Add grouped endpoints.

4. In the endpoint's configuration page, select Cameras are cross connected.

5. Click Update endpoint.

6. Go to Endpoint > Advanced settings.

7. For Transmitted video resolutions select 4:3 resolution only, and change Screen to receive H.239 content/audio to the nominated primary codec. (On the two-screen RPX system, the primary codec is the second codec from the left, whereas on a four-screen RPX system it is the third codec from the left.)

8. Click Update endpoint.

Related Information

• Technical Support & Documentation - Cisco Systems