Explore Cisco
How to Buy

Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

Which media codecs does ConferenceMe require?

Available Languages

Updated:April 23, 2015
Document ID:112713

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to the Cisco TelePresence MCU 4200 Series and Cisco TelePresence MCU 4500 Series products.

Q. Which media codecs does ConferenceMe require?

A. ConferenceMe requires that both the H.264 and G.722.1 Annex C media codecs are enabled on the MCU.

To enable H.264 and G.722.1 Annex C:

  1. Go to Settings > Conferences.

  2. Scroll down to Advanced settings.

  3. For Audio codecs from MCU, select G.722.1 Annex C.

  4. For Audio codecs to MCU, select G.722.1 Annex C.

  5. For Video codecs from MCU, select H.264.

  6. For Video codecs to MCU, select H.264.

  7. Click Apply changes.

If you do not have these codecs enabled, you will not receive any audio or video.

Note

: If you only have one direction enabled, you will not send or receive audio or video in either direction.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products