This article relates to the Cisco TelePresence MCU 4203, Cisco TelePresence MCU MSE 8420, Cisco TelePresence MCU 4505 and Cisco TelePresence MCU MSE 8510 products.
Q. How do I call from an MGC to a conference on a Codian MCU?
A. Create the conference on the Codian MCU and ensure that it has a numeric identifier configured.
On the MGC, define an endpoint which has the IP address of the Codian MCU, set the additional parameter to Party Number, and enter the conference's numeric ID as configured on the Codian MCU as the value.
When the MGC calls the Codian MCU, the call should go straight to the relevant conference.
We recommend you use 1 x 1 voice-activated mode for cascaded conferences. This can be set up either box wide at Settings > Conferences, or as a custom layout for this conference.