Cisco Silicon One Q202 and Q202L Processors Data Sheet

Available Languages

Download Options

  • PDF
    (524.3 KB)
    View with Adobe Reader on a variety of devices
Updated:November 13, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (524.3 KB)
    View with Adobe Reader on a variety of devices
Updated:November 13, 2020

Table of Contents



The silicon industry has always been plagued with the trichotomy of switching silicon, routing line card silicon, and routing fabric silicon. Using these three basic building blocks, silicon and system vendors created unique architectures tuned for individual markets and industries. Consequentially, forcing customers to consume and manage these disjointed and dissimilar products caused an explosion in complexity, CapEx, and OpEx for the industry.

The Cisco Silicon One architecture ushers in a new era of networking, enabling one silicon architecture to address a broad market space, while simultaneously providing best-of-breed devices.

At 3.2 Tbps, the Cisco Silicon One Q202L builds on the ground-breaking technology of the Cisco Silicon One Q200L but brings the efficiency and flexibility of Cisco Silicon One and 7 nm down to the 32x100GE Top-of-Rack (ToR) switches. The Q202 provides similar advantages for the WAN and peering routers, enabling a 32x100GE deep-buffered and high-scale router.

Product overview

The Cisco Silicon One Q202 processor is a 3.2-Tbps, full-duplex, standalone routing processor with deep buffers, while the Cisco Silicon One Q202L is a 3.2-Tbps, full-duplex, standalone switching processor.

Cisco Silicon One Q202 can be used to build fixed form factor routers ideally targeted for peering, lean edge, and access applications. The Cisco Silicon One Q202L can be used to build fixed form factor switches ideally targeted for data center Top-of-Rack (ToR) applications.

Unified SDK

Features and benefits

Table 1.        Architectural Characteristics and Benefits



Unified architecture across multiple markets

Greatly simplifies customer network infrastructure deployments

Unified SDK across market segments and applications

Provides a consistent point of integration for all applications across the entire network infrastructure

High-performance routing and switching silicon

Achieve line rate at small packet sizes

Power-efficient routing and switching silicon

The power efficiency of 7 nm and the Cisco Silicon One architecture

Large and fully unified packet buffer

Fully shared on-die buffer with optional large, external packet buffer

Switching efficiency with routing features and scale

Addresses the requirements of service provider and web-scale providers’ routing and switching applications

Run-to-completion network processor

Provides feature flexibility without compromising performance or power efficiency

P4 programmable

Leverages an open-source programming language to enable customers to define their own features

Prominent feature

Flexibility, Performance, and Scale for Next-Generation Service Provider and Web-Scale Networks

Prominent feature


      128 28G SerDes; each can be configured independently to operate in 10G/25G using NRZ modulation

      Flexible port configuration supporting 10/25/40/50/100 Gbps

      Large, fully shared, on-die packet buffer

      Large, in-package packet buffer (Q202 only)

      1588v2 and SyncE support with nanosecond-level accuracy

      On-chip, high-performance, P4-programmable host NPU for high-bandwidth offline packet processing (for example, OAM processing, MAC learning)

      Multiple embedded processors for CPU offloading

Traffic Management

      Large pool of configurable queues, supporting DiffServ and hierarchical QoS

      Support for system-level, end-to-end QoS and scheduling for both unicast and multicast traffic

      Seamless extension of on-die buffer to external packet buffer

      Support for ingress and egress traffic mirroring

      Support for link-level (IEEE802.3x), PFC priority-level (802.1Qbb) flow control and ECN Marking

      Support of port extenders

Network Processor

      Run-to-completion, P4-programmable network processor

      Line rate at very small packets even with complex packet processing

      Large and shared fungible tables

      Support for complex packet processing features without impacting data rate

      Support for simple packet processing features with optimized power and latency

Load Balancing

      Flow load balancing using ECMP or LAG

      Dynamic flowlet load balancing with ability to detect and handle elephant flows

Instrumentation and Telemetry

      Programmable meters used for traffic policing and coloring

      Programmable counters used for flow statistics and OAM loss measurements

      Programmable counters used for port utilization, microburst detection, delay measurements, flow tracking, elephant flow detection, and congestion tracking

      Traffic mirroring: (ER)SPAN on drop

      Support for sFlow and NetFlow


      APIs provided in both C++ and Python

      Configurability via high-level networking objects

      Distribution-independent Linux packaging

      Robust simulation environment enables rapid feature development

      CPU packet I/O through native Linux network interfaces

P4 Programmability

      Application development is handled by a P4-based IDE programming environment

      At compilation, the P4 application generates low-level register/memory access APIs and higher-level SDK Application APIs

      Provides application support for a wide range of data center, service provider, and enterprise protocols

      Modifications to the provided application can be easily accomplished using the provided P4 development environment

      Ability to develop the SDK and applications running over the SDK over a simulated Cisco Silicon One device

Cisco P4 Application

Due to Silicon One’s extensible P4 programming toolkit, we are always adding features to address new markets and new customer requirements; however, a sample of the features that are currently available with the P4 code is provided below:




  MPLS Forwarding





    L3VPN, 6PE, 6VPE

    BGP LU



  Ethernet Switching

    802.1d, 802.1p, 802.1q, 802.1ad

  IP Tunneling




  Integrated Routing and Bridging (IRB)
  Policy-Based Routing
  Security and QoS ACLs
  ECMP and LAG (802.3ad)





  Protection (Link/Node/Path and TI-LFA)
  QoS Classification and Marking
  Congestion Management

    NetFlow, sFlow


    Packet Mirroring with Appended Metadata

    Lawful Intercept

  DDoS Mitigation

    Control-Plane Policing

    BGP Flowspec

  Timing and Frequency Synchronization



Product sustainability

Information about Cisco’s Environmental, Social, and Governance (ESG) initiatives and performance is provided in Cisco’s CSR and sustainability reporting.

Table 2.        Cisco Environmental Sustainability Information

Sustainability Topic



Information on product-material-content laws and regulations


Information on electronic waste laws and regulations, including our products, batteries, and packaging

WEEE Compliance

Information on product takeback and resuse program

Cisco Takeback and Reuse Program

Sustainability inquiries



Product packaging weight and materials


For more information

Learn more about the Cisco Silicon One




Learn more