EoS/EoL for the Cisco 7600 Series Router 1900-Watt AC and DC Power Supplies
Available Languages
Download Options
PDF(90.2 KB) View with Adobe Reader on a variety of devices
Updated:September 4, 2007
Document ID:1518669805182456
EOL6188
Cisco® announces the end-of-sale and end-of-life dates for the Cisco 7600 Series Router 1900-Watt AC and DC Power Supplies. The last day to order the affected product(s) is April 11, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 7600 Series Router 1900-Watt AC and DC Power Supplies
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
October 12, 2007
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
April 11, 2008
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
July 10, 2008
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
April 11, 2009
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
April 11, 2009
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
July 7, 2012
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
April 10, 2013
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
PEM-20A-AC
Power Entry Module for CISCO7606 (1900W Pwr Sup)
PWR-2700-AC
2700W AC power supply for CISCO7606
PEM-20A-AC/2
Redun. AC Power Entry Module for CISCO7606 (1900W PS)
PWR-2700-AC
2700W AC power supply for CISCO7606
PEM-20A-AC=
Power Entry Module CISCO7606
PWR-2700-AC=
2700W AC power supply for CISCO7606
PEM-DC
DC Power Entry Module Cisco7606
PWR-2700-DC
2700W DC power supply for CISCO7606
PEM-DC/2
Redun. DC Power Entry Module for Cisco7606
PWR-2700-DC
2700W DC power supply for CISCO7606
PEM-DC=
Spare DC Power Entry Module for Cisco7606
PWR-2700-DC=
2700W DC power supply for CISCO7606
PWR-1900-AC/6
1900W AC Power Supply for Cisco7606
PWR-2700-AC
2700W AC power supply for CISCO7606
PWR-1900-AC/6/2
Redundant 1900W AC Pwr Sup Cisco7606
PWR-2700-AC
2700W AC power supply for CISCO7606
PWR-1900-AC/6=
1900W AC Power Supply for Cisco7606
PWR-2700-AC=
2700W AC power supply for CISCO7606
PWR-1900-DC
1900W DC Power Supply for Cisco7606
PWR-2700-DC
2700W DC power supply for CISCO7606
PWR-1900-DC/2
Redun.1900W DC Power Supply for Cisco7606
PWR-2700-DC
2700W DC power supply for CISCO7606
PWR-1900-DC=
1900W DC Power Supply for Cisco7606
PWR-2700-DC=
2700W DC power supply for CISCO7606
Product Migration Options
Customers are encouraged to migrate to the Cisco 7600 Series Router 2700-Watt AC and DC Power Supplies.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://cisco.com/go/remarketing