EOL8201 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco 7600 Series Supervisor Engine 720 and Supervisor Engine 720 Bundles. The last day to order the affected product(s) is January 30, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers’ service contract.
Note: All SUP720 supervisor cards, whether purchased as spares or part of a bundle, will follow this EOL schedule if they are used on a 7600 chassis.
Table 1. End-of-Life Milestones and Dates for the Cisco 7600 Series Supervisor Engine 720 and Supervisor Engine 720 Bundles
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
April 19, 2012 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
January 30, 2013 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
April 30, 2013 |
End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
January 30, 2014 |
End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
January 30, 2014 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
January 30, 2014 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
April 30, 2017 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
January 31, 2018 |
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
7603S-SUP720B-P |
Cisco 7603S Chassis, 3-slot, SUP720-3B, PS |
7603S-RSP720C-P |
Cisco 7603S Chassis, 3-slot, RSP720-3C, PS |
- |
7603S-SUP720B-R |
Cisco 7603S Chassis, 3-slot, Redundant System, 2SUP720-3B, 2PS |
7603S-RSP720C-R |
Cisco 7603S Chassis, 3-slot, Redundant System, 2RSP720-3C, 2PS |
- |
7603S-SUP720BXL-P |
Cisco 7603S Chassis, 3-slot, SUP720-3BXL, PS |
7603S-RSP720CXL-P |
Cisco 7603S Chassis, 3-slot, RSP720-3CXL, PS |
- |
7603S-SUP720BXL-R |
Cisco 7603S Chassis, 3-slot, Redundant System, 2SUP720-3BXL, 2PS |
7603S-RSP720CXL-R |
Cisco 7603S Chassis, 3-slot, Redundant System, 2RSP720-3CXL, 2PS |
- |
7604-2SUP7203B-2PS |
Cisco 7604 Chassis, 4-slot, 2 SUP720-3B, 2 PS |
7604-RSP720C-R |
Cisco 7604 Chassis, 4-slot, Redundant System, 2RSP720-3C, 2PS |
- |
7604-2SUP720XL-2PS |
Cisco 7604 Chassis, 4-slot, 2SUP720-3BXL, 2 PS |
7604-RSP720CXL-R |
Cisco 7604 Chassis, 4-slot, Redundant System, 2RSP720-3CXL, 2PS |
- |
7604-SUP7203B-PS |
Cisco 7604 Chassis, 4-slot, SUP720-3B, PS |
7604-RSP720C-P |
Cisco 7604 Chassis, 4-slot, RSP720-3C, PS |
- |
7604-SUP720XL-PS |
Cisco 7604 chassis, 4-slot, SUP720-3BXL, PS |
7604-RSP720CXL-P |
Cisco 7604 Chassis, 4-slot, RSP720-3CXL, PS |
- |
7606S-SUP720B-P |
Cisco 7606S Chassis, 6-slot, SUP720-3B, PS |
7606S-RSP720C-P |
Cisco 7606S Chassis, 6-slot, RSP720-3C, PS |
- |
7606S-SUP720B-R |
Cisco 7606S Chassis, 6-slot, Redundant System, 2SUP720-3B, 2PS |
7606S-RSP720C-R |
Cisco 7606S Chassis, 6-slot, Redundant System, 2RSP720-3C, 2PS |
- |
7606S-SUP720BXL-P |
Cisco 7606S Chassis, 6-slot, SUP720-3BXL, PS |
7606S-RSP720CXL-P |
Cisco 7606S Chassis, 6-slot, RSP720-3CXL, PS |
- |
7606S-SUP720BXL-R |
Cisco 7606S Chassis, 6-slot, Redundant System, 2SUP720-3BXL, 2PS |
7606S-RSP720CXL-R |
Cisco 7606S Chassis, 6-slot, Redundant System, 2RSP720-3CXL, 2PS |
- |
7609S-SUP720B-P |
Cisco 7609S Chassis, 9-slot, SUP720-3B, PS |
7609S-RSP720C-P |
Cisco 7609S Chassis, 9-slot, RSP720-3C, PS |
- |
7609S-SUP720B-R |
Cisco 7609S Chassis, 9-slot, Redundant System, 2SUP720-3B, 2PS |
7609S-RSP720C-R |
Cisco 7609S Chassis, 9-slot, Redundant System, 2RSP720-3C, 2PS |
- |
7609S-SUP720BXL-P |
Cisco 7609S Chassis, 9-slot, SUP720-3BXL, PS |
7609S-RSP720CXL-P |
Cisco 7609S Chassis, 9-slot, RSP720-3CXL, PS |
- |
7609S-SUP720BXL-R |
Cisco 7609S Chassis, 9-slot, Redundant System, 2SUP720-3BXL, 2PS |
7609S-RSP720CXL-R |
Cisco 7609S Chassis, 9-slot, Redundant System, 2RSP720-3CXL, 2PS |
- |
7613-2SUP7203B-2PS |
Cisco 7613 Chassis, 13-slot, 2 SUP7203B, 2 Power Supply |
7613-RSP720C-R |
Cisco 7613 Chassis, 13-slot, Redundant System, 2RSP720-3C, 2PS |
- |
7613-2SUP720XL-2PS |
Cisco 7613 13-slot, Redundant System, 2 SUP720-3BXL and 2 PS |
7613-RSP720CXL-R |
Cisco 7613 Chassis, 13-slot, Redundant System, 2RSP720-3CXL, 2PS |
- |
7613-SUP7203B-PS |
Cisco 7613 Chassis, 13-slot, SUP7203B, Power Supply |
7613-RSP720C-P |
Cisco 7613 Chassis, 13-slot, RSP720-3C, PS |
- |
7613-SUP720XL-PS |
Cisco 7613 13-slot, SUP720-3BXL and PS |
7613-RSP720CXL-P |
Cisco 7613 Chassis, 13-slot, RSP720-3CXL, PS |
- |
Product Migration Options
Customers are encouraged to migrate to the Cisco 7600 Series Route Switch Processor 720. Information about this product can be found at:
http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8057f3b6.html.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco 7600 Series Supervisor Engine 720 and Supervisor Engine 720 Bundles through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more Information about the Cisco 7600 Series Route Switch Processor 720, visit http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8057f3b6.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to:
http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.