EoS and EoL for Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards

Available Languages

Download Options

PDF (139.0 KB)
View with Adobe Reader on a variety of devices

Updated:October 5, 2006

Document ID:1518680419688684

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Product Bulletin No. EOL5097

Cisco Systems ® announces the end-of-sale and end-of life dates for the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards. The last day to order the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards is June 1, 2001. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards. Table 2 lists the product part numbers affected by this announcement.

Table 1. End-of-Life Milestones and Dates for the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards.


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	June 1, 2000
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	June 1, 2001
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	August 31, 2001
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	June 1, 2002
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	June 1, 2002
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	August 30, 2005
Last Date of Support: HW	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	May 31, 2006

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description
OC48/SRP-LR-SC	OC48 SRP Linecard, Single Mode, Long Reach	OC48/SRP-LR-SC-B	OC48 SRP Rev-B Line Card, Single Mode, Long Reach
OC48/SRP-LR-SC=	OC48 SRP Linecard, Single Mode, Long Reach	OC48/SRP-LR-SC-B=	OC48 SRP Rev-B Line Card, Single Mode, Long Reach
OC48/SRP-LR-PAIR	Two OC48/SRP-LR-SC Line Cards with MATE Cable	OC48/SRP-LR-SC-B	OC48 SRP Rev-B Line Card, Single Mode, Long Reach
OC48/SRP-LR-PAIR=	Two OC48/SRP-LR-SC Line Cards with MATE Cable	OC48/SRP-LR-SC-B=	OC48 SRP Rev-B Line Card, Single Mode, Long Reach
OC48/SRP-SR-SC	OC48 SRP Linecard, Single Mode, Short Reach, GSR	OC48/SRP-SR-SC-B	OC48 SRP Rev-B Line Card, Single Mode, Short Reach, GSR
OC48/SRP-SR-SC=	OC48 SRP Linecard, Single Mode, Short Reach, GSR	OC48/SRP-SR-SC-B=	OC48 SRP Rev-B Line Card, Single Mode, Short Reach, GSR
OC48/SRP-SR-PAIR	Two OC48/SRP-SR-SC Line Cards with MATE Cable	OC48/SRP-SR-SC-B	OC48 SRP Rev-B Line Card, Single Mode, Short Reach, GSR
OC48/SRP-SR-PAIR=	Two OC48/SRP-SR-SC Line Cards with MATE Cable, GSR	OC48/SRP-SR-SC-B=	OC48 SRP Rev-B Line Card, Single Mode, Short Reach, GSR

PRODUCT MIGRATION OPTIONS

Customers are encouraged to migrate to the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards, -B version. Information about this product can be found at: http://www.cisco.com/en/US/products/hw/routers/ps167/products_relevant_interfaces_and_modules.html.

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

Customers may be able to continue to purchase the end-of-sale product through Cisco's Authorized Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://www.cisco.com/en/US/ordering/or6/or17/order_refurbished_equipment_program_description.html.

FOR MORE INFORMATION

For more information about the Cisco 12000 Series 1-Port OC-48c/STM-16c DPT Line Cards [OC48/SRP-SR-SC-B(=) & OC48/SRP-LR-SC-B(=)], visit , contact your local account representative, or send an e-mail to ask-gsr-pm@cisco.com.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.

To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.

Contact Cisco

Was this Document Helpful?

Feedback