Cisco Systems
Close Window

 
     
 
   



Main Help Topics

Basic Setting
Security
Filters
QoS Configuration
Radio Configuration
VLAN Configuration
Ethernet Configuration
Server Setup
Proxy Mobile IP
Routing Setup
Network Management
Event Notification
Update Firmware
Distribute Firmware and Configuration
Diagnostics
Hot Standby Setup
Index of Help Topics

Update Firmware : Update All Firmware from File Server

Use this page to update firmware from the file server. After making a firmware update on this page, the device is automatically rebooted to activate the new firmware.

Note The access point only updates the radio firmware if the radio firmware version to be loaded is newer than the firmware in the radio.

Settings

Current Firmware Versions

This section shows three current firmware version levels:

  • System firmware
  • Web page
  • Radio firmware

New File for All Firmware

Use this section to enter the new firmware filename. Enter the full filename.

File Server Setup

This link takes you to the FTP Setup page.

Action Buttons

Command

Description

Update from Server

After you enter the firmware file name, click Update From Server to load and install the new firmware. When the update is complete, the device automatically reboots.

Save To Server

Click this button to save the System Firmware and web pages to your server.

Done

This button sends you back to the Cisco Services Setup page after updates and saves are complete.

Cancel

This button cancels all changes to the settings, returns the settings to the previously stored values, and sends you back to the Cisco Services Setup page.

 

 
 

Copyright (c) 1992-2002 by Cisco Systems, Inc.