Guest

Cisco 2500 Series Routers

Default Flash Memory on the Cisco 2500 Series, No. 680

Product Bulletin No. 680

Default Flash Memory on the Cisco 2500 Series

Introduction

This product bulletin covers the increase in Default Flash Memory on the Cisco 2500 series and the New Memory Factory upgrade part numbers. Effective immediately, ALL Cisco 2500 series, except for the Mission-Specific routers (the FRADs - Frame Relay Access Devices), will ship with 8MB Flash memory as default for all IOS Releases. Prior to this announcement, 8MB Flash default was only true for IOS Release 11.2. This change is to simplify the ordering process and to allow customers to have potential future code growth.

There is no change to the default DRAM: Cisco will continue to ship the minimum necessary DRAM (4MB, 8MB, or 16MB) required by the software image being purchased. There is no change to the -CH products.

New part numbers for the optional factory upgrades for flash and DRAM are outlined in the summary tables below:

New Optional Factory Memory Upgrade Products


Table 1: NEW Factory Flash Memory Upgrade Part Number
Factory Flash Memory Upgrade Part Number Product Description

MEM2500-8U16F

8MB-to-16MB Flash SIMM Factory Upgrade for Cisco 2500 series


Table 2: NEW Factory DRAM Memory Upgrade Part Numbers
Factory DRAM Memory Upgrade Part Number Product Description

MEM2500-4U8D

4MB-to-8MB DRAM SIMM Factory Upgrade for Cisco 2500 series

MEM2500-4U16D

4MB-to-16MB DRAM SIMM Factory Upgrade for Cisco 2500 series

MEM2500-8U16D

8MB-to-16MB DRAM SIMM Factory Upgrade for Cisco 2500 series

Assistance

For pre-sales or orderability questions regarding the Cisco 2500 series products, please contact your Customer Service Representative at 408-526-7208